Quickstart
– Radar Precipitation Sensor R2S
Status 06/2016
G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany
1
R2S Quickstart: Connection & First Check
Thank you for choosing our product. With this quickstart sheet, we would like to assist with connection,
installation and first check of the Radar Precipitation Sensor R2S.
Connections & Pin assignment
:
Connection to ISOCON-UMB:
1
White
Neg. power supply
(GND2)
2
Brown
Pos. power supply
(+24VDC)
3
Green
RS485_A (+)
4
Yellow RS485_B (-)
5
Grey
Not assigned
6
Pink
Uout1
7
Blue
GND ref. pot. Digital outputs
8
Red
Uout2
Note:
The screening of the connection cable must not be laid to earth in the control
cabinet!
First check of R2S after installation via UMB-Config-Tool software:
1. Install UMB Config tool software on the PC or laptop
(Software available on the in the delivery included memory stick and on
2. Connect Com-Port PC/laptop with interface ISOCON-UMB (RS232-SUBD9 1:1)
3. Start program under:
Start
programs
Lufft UMB-Config
start UMB-Config Tool
4. Choose used Com-
port “
Edit
connection settings
”
5.
Open sensor menu with „
Edit
Sensors
“, use „
Type of sensor
“ and add the R2S (click add
button) to the sensor list
6.
Use „
Verify
“ to check the communication to the sensor
7.
Click on „
Active channels
“ and activate the desired channels
(click on the channel)
8.
Leave window with button„
Save/Exit
“
and s
tart measurement using button „
file -> start measurement
“
Manual of the Lufft Radar Precipitation Sensor R2S:
You can find the complete manual of the R2S on the memory stick, which is
included in the scope of delivery or as download under the following link:
