DIN-DMX-350
CC DMX/RDM DECODER
1. Product Parameter:
DIN-DMX-350 CC DMX/RDM Decoder
DIN-DMX-350 CC DMX/RDM Decoder
1
(
DIN Rail, Screw Dual-use
)
DIN-DMX-350 CC
DMX/RDM Decoder:
Input Signal:
Input Voltage:
Output Voltage:
Max. Load Current:
Max. Output Power:
Dimming Range:
Mounting:
DMX512, RDM
12~48Vdc
3~46Vdc
350mA × 3CH
(1.05W~16.1W) × 3CH Max. 48.3W
0~100%
DIN Rail or Screw
DIN Rail Mounting Size:
Working Temperature:
Dimensions:
Package Size:
Weight (G.W):
Protection:
TS-35/7.5 or TS-35/15
-30
℃
~55
℃
L112×W35×H67(mm)
L114×W37×H70(mm)
135g
Short circuit / Over current
DIN-DMX-350 DIN Rail DMX decoder have 3 digits digital tube to display DMX address, simple
and intuitive read and write DMX address, meanwhile have the self-testing pattern function. With
the standard RDM remote device management protocol, supports DMX512 signal bi-directional
communication, achieves remote management of reading and writing DMX address (DMX master
controller must recognize the RDM protocol).
DIN-DMX-350 can work with DMX512 console; realize 0-100% brightness and various changing
effects, can control single color, bi-color, RGB LED light .
s
2. Product Size:
3. Function Key:
+
+
-
-
M
M
Running Light
M KEY
The running light flashes quickly when input
DMX signal. Flash frequency depends on
received frame rate. The running light
flashes as usual in free time.
Short press: enter DMX decoder mode.
Long press: enter self-testing scene mode.
3.1
DMX Decoder Mode.
Address Setting:
In DMX Decoder Mode, first press "+" or "-" key to enter address setting. Changing
the DMX initial address when the 3 address value start to flicker. (Range: 001-512)
Long press and key
at the same time, set the
brightness output to linearity
curve (C-L).
Long press and key
at the same time, set the
brightness output to Gamma
curve (C-E)
Long press and key
at the same time, check the
present luminosity curve.
+
-
M
Short press to add one more address, long press to
quickly.
Short press to subtract one more address, long press to subtract quickly.
Short press to quit.
add
:
:
:
2
DMX/RDM
signal input
DMX/RDM
signal output
12
-
48Vdc
power input
LED lamps
connection
