background image

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED

AC-58000-300_DBL_LST_EN_0804.PDF • PAGE 1

A

Building Safety. Building Security.

Description

•   ADM loop technology with

Apollo/Discovery protocol

•   Ideal supplement to common smoke 

detectors

•   Sensitivity selectable in 5 steps
•   Optional connection of remote 

indicator

•  Sealed electronics

The Carbon Monoxide Detector AC-58000-300 uses a 

durable electrochemical CO sensor. It is an ideal sup-

plement to common smoke detectors because it is in-

sensitive to the usual vapors and household products, 

in low concentrations. The carbon monoxide detector 

does  not  respond  to  smoke  particles  and  heat,  and 

therefore it shall only be used in addition to smoke or 

heat detectors. Besides, the size of the fi re area shall 

not exceed 50m

2

.

The proven ADM loop technology with Apollo/Discovery 

protocol establishes a permanent communication bet-

ween the fi re detection control panel and the detector. 

That ensures a periodical function testing of the detec-

tor.

The two LEDs with 360° visibility indicate the activated 

condition of the detector. The detector address is se-

lected by means of a code card in the detector base. 

Therefore the detector can be changed without additi-

onal tools.

The detector can be attached to different types of ba-

ses, and it can be protected against theft.

Specifi cations

Operating voltage 

Supply through loop voltage

Current consumption 

typ. 400µA (quiescent)

Ambient temperature 

0°C to +40°C (no condensation)

Relative humidity 

15 – 90% (no condensation)

Dimensions ø × H 

100 × 42 (mm)

Colour 

white

Weight 

105g

Order number 

243100

Order name 

CO-Detector/Anal./Disc/Apo AC-58000-300

Reviews: