background image

*988-10401-003*

English 

WIFI-1

Installation Guide 

www.bandg.com | www.simrad-yachting.com | www.lowrance.com

52 mm (2.05”)

156 mm (6.14”)

25 mm (1.0”)

187 mm (7.36”)

171 mm (6.76”)

154 mm (6.06”)

Installing 

Layout

Dimensional drawing

Setup

Upgrade the WIFI-1 software if prompted

Key

Description

1

Antenna 

2

Ethernet ports x 2

3

Power connector

4

Ethernet LEDs Green: port is active 

5

Power LED Red: power on

2

2

4

5

3

1

+ _

4

4

6

5

8

9

2

3

1

7

Key

Description

1

Multifunction display, SonarHub™, 
StructureScan™ or other WIFI-1

2

WIFI-1

3

Optional second WIFI-1 to use in Access 
Point mode when the primary WIFI-1 
is in Client mode. Maintains the ability 
of mobile devices to connect to the 
navigation network

4

Ethernet cable

5

Power cable

6

Remote power on: WIFI-1 will turn on 
when power is applied

7

Fuse or breaker

8

12 V DC

9

Remote power on: WIFI-1 will turn on 
when the MFD is turned on (MFD needs 
to be set to power on master) 

Wiring

References

For a list of supported features or to download 
the latest software for your MFD please visit:

:

www.bandg.com/gofree

www.simrad-yachting.com/gofree

www.lowrance.com/gofree

Compliance statements

This device complies with Part 15 of the FCC Rules and with Industry 
Canada license-exempt RSS standard(s). Operation is subject to the 
following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 
FCC Identifier: RAYGOFREEWIFI 

Select HOME or PAGES key

WIFI-1 features

Marinised construction

IPX5

Wireless standards

802.11 b/g

Ethernet network ports

2

Automatic configuration

Plug-n-play

Power supply

12 V DC,  200 mA

Supported hotspot security

WPA-PSK, WPA2, WPE 64/128 bit 
encryption , TKIP encryption

Specifications 

 

¼

Note: 

Compatible MFDs are required to have software that can support 

the GoFree Shop features. Please refer to the support page of the MFD 
website to upgrade the MFD.  The MFD will then check the firmware 
version of the WIFI-1 module and will prompt an upgrade if required.

Reviews: