SUMO™ GL2LINX Installation Instructions
IMPORTANT: USE THESE INSTRUCTIONS TO INSTALL THE SUMO GL2LINX & GL2 GATE LOCK
1
Mounting Bracket A
2
Mounting Bracket B
3
Mounting Bracket C
4
Gate Adapter
5
Fence Adapter
6
Security Guide Bolt
7
Keyed Guide Bolt Receiver
8
Latch Assembly
9
Lock Hood
10
Strike Assembly Y
11
Strike Assembly Z
12
Spindle
13
Spacers
14
Strike Plate
15
Support Pin
16
Hex Bolts
17
M4 Screws
18
1/2” Self-Tapping Screws (4)
19
3/4” Large Phillips Screws (2)
20
Rubber Trim Plate
21
Outside Lock Body
22
Inside Lock Body
23
Flat Head M4 Screws
24
Set Screw
25
Jamb Stop
26
M4 Pan Head Screws
27
1” Self-Tapping Screws
INSTALLATION INSTRUCTIONS
1. Hold Gate Adapter (#4) to the 1-5/8” or 1-7/8” gate frame where you would like the lock to mount. Use a marker to
mark holes B, C, and D on both sides of the gate to prepare for drilling (See Diagram 1).
2. Use a 3/8” drill bit to drill holes marked B & D on both sides. Use a ½” drill bit to drill hole marked C on both sides.
3. Align the Gate Adapter with the holes you drilled in the gate. Self-drill two of the 1” Self-Tapping Screws (#27) into the
holes marked E & F on the side of the Gate Adapter (See Diagram 1).
4. Temporarily secure Mounting Bracket A (#1) to the Gate Adapter on the pull side of the gate using a ½” Self-Tapping
Screw (#18) in the center hole of the bracket. The two tabs on Mounting Bracket A must mount on the inside edge of the
gate facing toward the fence post.
a. Insert the Security Guide Bolt (#6) into the bottom hole on Mounting Bracket A with the bolt pointing
towards the fence post. DO NOT tighten the set screw at this time.
5. Secure Mounting Bracket C (#3), Keyed Guide Bolt Receiver (#7) and Strike Assembly Y (#10) to the Fence Adapter (#5).
a. Slide the Keyed Guide Bolt Receiver onto the bottom channel of Mounting Bracket C. The two tabs on Mounting
Bracket C must be on the inside edge of the post facing towards the lock. NOTE: The keyed hook MUST be in
the locked position in order to slide the Keyed Guide Bolt Receiver onto Mounting Bracket C. After the Keyed
Guide Bolt Receiver is installed on Mounting Bracket C, unlock the receiver.
b. Slide Strike Assembly Y onto the top channel of Mounting Bracket C.
c. Secure Mounting Bracket C to the Fence Adapter with the Keyed Guide Bolt Receiver & Strike Assembly Y attached.
i. Use two 2” M4 Pan Head Screws (#26) through the Strike Assembly Y.
ii. Use two 1” M4 Pan Head Screws (#26) through the Keyed Guide Bolt Receiver.
iii. Use two 3/8” M4 Pan Head Screws (#26) through the two tabs on the inside edge of Mounting Bracket C.
6. Hold the Fence Adapter to the pull side of the fence post with everything attached and align the Keyed Guide Bolt
Receiver with the Security Guide Bolt on Mounting Bracket A (See Diagram 2).
7. Once the Security Guide Bolt is aligned and has the ability to slide into the Keyed Guide Bolt Receiver, secure the
Fence Adapter to the fence post with four 1” Self-Tapping Screws in the slotted holes on each side of the adapter (See
Diagram 3).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
20
21
Diagram 2
22
(Single Combination)
22
(Double Combination)
15
16
17
18
19
23
24
A
B
C
25
IMPORTANT INFORMATION ABOUT YOUR SUMO™ GL2 GATE LOCK
- To retain SUMO™ product warranty, the gate must have a slam prevention device installed. Use of spring closers
and/or self-closing hinges without a slam prevention device will void the warranty. LockeyUSA recommends a
hydraulic gate closer, such as a TB Series gate closer.
- To retain SUMO™ product warranty, the provided jamb stop must also be installed.
- SUMO™ mounts on left and right hand gates. SUMO™ Mounting Bracket A must be mounted on the pull side of
the gate. Lockout feature works on pull side of gate only. If your gate is an inswing gate, you may want to switch
hinges to allow the pull side of the gate to be the exterior or you can simply switch the outside and inside lock
bodies when installing.
- There will be parts included that you will not use for the installation of the SUMO™ GL2LINX and SUMO™ GL2.
26
Diagram 1
A
B
C
D
E
F
Diagram 3
27
Y
Z
Gate
Adapter
Fence
Adapter
