background image

                 

  

 

 

 

 

_________________________________________________________________________________________ 

 

                               

IEEE1394 2+1 Port PCI Card

 

 

User Manual                                                                          

English 

 

 

 

 

 

 

 

 

 

 

LINDY No. 51097 

 

www.LINDY.com 

 

 

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH  -  FIRST EDITION (Jan. 2008) 

Introduction 

Thank you for purchasing the LINDY FireWire 1394 2+1 card! 

With the LINDY FireWire 1394 Card can instantly connect devices to your PC without opening up the 

case. FireWire offers true plug and play and hot swapping of devices.  

 

Use the LINDY FireWire 1394 Card to provide an interface that enables you to transfer video from your 

digital camcorder to your PC for editing.  

 

Features: 

 

Supports Provisions of IEEE 1394-1995 Standard for High Performance Serial Bus and the P1394a 

Supplement 2.0. 

 

Full P1394a Supplement Support includes: 

    * Arbitrated short reset 

 

* Connection Debounce 

* Multi-speed Concatenation 

    * Ack Accelerated Arbitration 

* Fly-By Concatenation,         

 

Provides Four 1394a Fully Compliant Cable Ports at 100/200/400 Megabits per Second (Mbit/s) 

 

Logic Performs Bus Initialization and Arbitration Functions 

 

Encode and Decode Functions Included for Data-Strobe Bit-Level Encoding 

 

Incoming Data Resynchronized to Local Clock. 

 

Data Interface to Link-Layer Controller Provided Through 2/4/8 Parallel Lines at 49.152 MHz 

 

24.576 MHZ Crystal Oscillator and PLL Provide TX/RX Data at 100/200/400 Mbps and Link-Layer 

Controller  

 

Programmable Node Power Class Information for System Power Management 

 

Embedded Bus Holder Isolation to Link Layer Controller Interface 

 

Optional  On-chip  Resistors  to  Reduce  Component  Counts  for  Electrical  Isolation  to  Link  Layer 

Controller Interface 

 

Separate TPBIAS for Each Port 

 

Fully Interoperable with IEEE Std1394-1995 Devices 

 

Cable Ports Monitor Line Conditions for Active Connection to Remote Node 

 

Low Power Design for Battery-Powered Applications includes: User Controlled Power-Down via PD, 

Automatic  

 

Device Power-Down during All Ports Suspended and Link Interface Disabled, Link Interface Power-

Down via  

 

Inactive LPS, Automatic Inactive Ports Powered-Down, and Automatic Inactive Logic Power-Down 

 

Self Power Up Reset and Pinless PLL to Reduce Component Counts on System 

 

Compatible with Windows 98SE/ME/2000/XP/Vista and Mac OS 9.0 or later. 

 

    

             

                                     

WARNING: PORT 0 & PORT 4 are on the same circuit and cannot be used at the same time 

 

 

 

Reviews: