background image

The Sabina sit-to-stand lift is especially designed for people 

who have difficulty in standing up on their own from a 

seated position. 

Sabina sit-to-stand lift is intended for use with patients 

who are able to actively participate in the raising motion. 

When standing, they can be moved to a wheelchair or to a 

toilet; this gives them standing practice in connection with 

the transfer.

There are two different sling bar options for Sabina sit-to-

stand lift, as well as many different sit-to-stand vests.  

The patient’s overall mobility determines the choice of 

sling bar and sit-to-stand vest.

The Sabina sit-to-stand lift equipped with the Comfort 

SlingBar combined with the Liko ComfortVest provides an 

especially gentle lifting action without putting pressure 

under the arms. This combination is suitable for those who 

are especially sensitive to pressure under the arms, such as 

people who are paralyzed on one side.
Sabina sit-to-stand lift can also, to a limited extent, be used 

for passive lifting of a patient sitting in a sling.

 is a warning triangle used for situations which require extra care and attention.

 IMPORTANT!

Read the instruction guide for both the patient lift and lifting accessories before use. Lifting and transferring a person always involves 

a certain level of risk. It is important to completely understand the contents of the instruction guide. The equipment should be used 

by trained personnel only. Please contact Hill-Rom in the event of any uncertainties or questions.

Product Description

In this document, the person being lifted is referred to as the patient, and the person helping is referred to as the caregiver.

SlingBar 350

Comfort SlingBar

Sabina™ II

Sit-to-stand lift

Instruction Guide

Sabina II EE 

Prod. No. 2020003

7EN155106 Rev. 1

ENGLISH

Summary of Contents for Sabina II EE





















Reviews: