Lifegard Aquatics presents its Stream Fountain…a color-changing LED Light Stream that adds beauty, fun and enjoyment to
any Water Feature, Pond, Fountain or Pool. To create a Plug and Play fountain filter… our recommendation is to install with
a Quiet One 2200 pump that provides 581 GPH. Add a control valve to allow you to adjust the arch from 1' to 13'. Note: You
may need to adjust the length of the arch to be sure the light can travel from start to end. If the arch is too long -- the light
may not reach the end and the stream flow could get distorted. GUARANTEED -- YOU WILL LOVE IT !!!
Please read the following before installing or running the Stream Fountain
1 - Lifegard Stream Fountain must be used in clean water environment. If the water is dirty a Pre-Filter is
required. Flowing dirty water through the Lifegard Stream Fountain will result is improper flow and the stream
not show the normal smoothness.
2 - We Recommend Quiet One 2200, 3000 or 4000 pumps with the Lifegard Stream Fountain. If a pump of
some other company is used - make sure that the flow is Minimum 580 gph to a maximum of 951 gph. The
some other company is used - make sure that the flow is Minimum 580 gph to a maximum of 951 gph. The
consistency of flow in Quiet One pumps best suites the functionality of the Lifegard Stream Fountain. Avoid
pumps that don’t have consistent flow.
3 - The nozzle of the Lifegard Stream Fountain should never be submersed. Any resistance or hindrance to the
nozzle will result in broken stream. The fountain can be submersed into the water as long as the nozzle is above
water.
4 - Avoid using elbows at the in take of the Lifegard Stream Fountain. An elbow can cause distortion in pump
pressure and flow. If installing a flex pipe use a straight insert.
5 - A flow control valve is recommended. Install the valve at the pump discharge. The valve can be used to
adjust the flow and length of the arch. If the arch is too long it will distort the water pattern and may cause
splashing. A longer arch may also cause the light to not flow through the full length of the arch. Maintain the
arch to a maximum length of 12 feet.
6 - Periodic maintenance is required for proper flow of water and light. Please see the maintenance instruction
to clean the LED light lens and the filter sponges inside the fountain.
7 - Ballast is not submersible. Turn the LED Light on only when the water is running
Jolie
Products,
Inc
