background image

Contents

      i

Contents

Chapter 1. About this manual ..............................................1

Important

 

Safety Information .............................................................................. 1

Using eSupport ........................................................................................................... 2
Important information about replacing RoHS compliant FRUs .......... 2

Chapter 2. Safety information ..............................................4

General safety .............................................................................................................. 4
Electrical safety ............................................................................................................ 5
Safety inspection guide .......................................................................................... 7
Handling electrostatic discharge-sensitive devices  ................................. 8
Grounding requirements  ...................................................................................... 8
Safety notices ............................................................................................................... 9

Chapter 3. General information .........................................12

Specifications ............................................................................................................ 12

Chapter 4. General Checkout .............................................13

Problem determination tips  ............................................................................. 14

Chapter 5. Using the Setup Utility .....................................16

Starting the Setup Utility program ................................................................. 16
Viewing and changing settings ....................................................................... 16
Selecting a startup device .................................................................................. 17
Exiting from the Setup Utility program ........................................................ 18

Summary of Contents for 40813AU













































Reviews: