background image

Content Page

General Description / Technical Specifications / Safety Precautions  .......................................2
Care and Maintenance / Factory Settings / Functional Description .........................................3
Overview of Transponder Cards  ..............................................................................................4
System Components and Package Contents  ...........................................................................5
Dimensions...............................................................................................................................6
Mounting on non-metal surfaces ............................................................................................  7
Mounting on metal surfaces  ...................................................................................................9
Getting started and battery change / Tips for programming steps  .......................................10
Using the installation card / Programming the Master card ..................................................11
Programming the Master card / Closing and Opening  ..........................................................12
Unauthorised Transponders cards / Facility Manager Function / Emergency Opening .........13
Deleting Individual Transponder Cards / Deleting All Transponder Cards  .............................14
Changing Operating Mode .....................................................................................................15
Deactivating and activating acoustic signals / Resetting to factory settings ..........................16
Activation and deactivation of automatic locking ..................................................................17
Battery warning  .....................................................................................................................18
Reordering master cards / Firmware update / Disposal / Troubleshooting ...........................19

www.lehmann-locks.com

Operating instructions

GB

Captura 

(Captura 100 MIFARE®)

BD

A Cap

tur

a 100 MIF

ARE® / 22020-06-29 (GB)

Summary of Contents for Captura 100 MIFARE





















Reviews: