L
ittfinski
D
aten
T
echnik (
LDT
)
Operation Instruction
3-fold s88-N Adapter
Adap-HSI-s88-N
From the
Digital-Professional-Series!
Adap-HSI-s88-N-F
LDT-Part-No.:
038112
>> finished module <<
With the Adapter
Adap-HSI-s88-N
is it possible to
connect s88-Feedback Modules such as
RM-88-N
,
RM-88-N-O a
nd
RM-GB-8-N
directly by use of the
screened
Patch-Cable
to the
Interfaces
HSI-88
,
HSI-88-USB
and
DiCoStation
in accordance to
s88-N
.
This product is not a toy! Not suitable for children under 14 years of age! The kit
contains small parts, which should be kept away from children under 3! Improper
use will imply danger or injuring due to sharp edges and tips! Please store this
instruction carefully.
CE Part-No.:
44 40 21
Introduction/Safety Instruction:
You have purchased the
3-fold s88-N Adapter
Adap-HSI-s88-N
that is supplied within the assortment of
L
ittfinski
D
aten
T
echnik (
LDT
).
We wish you having a good time using this product.
•
Please read the following instructions carefully. Warranty will
expire due to damages caused by disregarding the operating
instructions.
LDT
will also be not liable for any consequential
damages caused by improper use or installation.
The adapter comes with a
24 month warranty
.
Connecting the Adapter to the Interfaces
HSI-88, HSI-88-USB or DiCoStation:
•
Attention: Please switch off your model railway layout
and unplug all transformers from AC-current before
starting to assemble the unit.
Connect the
three 6-poles socket bars
of the adapter
Adap-
HSI-s88-N
to the
three 6-poles pin bars
of the
Interfaces HSI-
88, HSI-88-USB
or the
DiCoStation
.
Please attend careful that there is no offset between the
position of the socket bars and the pin bars
.
For the
three s88-buslines
are now
RJ-45 Sockets
available
for realizing
s88-N
s88-bus connections to the feedback
modules by using
screened Patch-Cables
.
The
PC-board
of the adapter
Adap-HSI-s88-N
contains
three
RJ-45 sockets
for
three s88-buslines
marked with „
Left
“,
„
Middle
“ and „
Right
“ for the
left
,
middle
and
right
bus lines
to
the feedback modules.
Schnelles Computer-Interface für den s88 Rück-
meldebus. Ermöglicht drei s88 Rückmeldestränge.
High Speed Interface-88
HSI-88-USB
Littfinski DatenTechnik (LDT)
USB
ST1
LED1
LED2
STOP
GO
+
+
ST6
EXT-PORT
BOOSTER
ST2
Digital-Profi werden!
L
ittfinski
D
aten
T
echnik (
LDT
)
D-25492 Heist
www.ldt-infocenter.com
DiCoStation
Rev. 1.0
s88 Rückmeldebus
s88 feedback bus
Software by
Falkner
everytime up-to-date
14..18V~
br. gelb
LEFT
MIDDLE
RIGHT
SolderSide
Adap-HSI-s88-N Rev. 1.1
Littfinski DatenTechnik (LDT)
The draft shows the
High Speed Interface HSI-88-USB
with
connected Adapter
Adap-HSI-s88-N
.
Further LDT-Products from the
Digital-
Professional-Series
:
S-DEC-4
4-fold turnout decoder
for four outputs and with free
programmable decoder address. With possible external power
supply.
SA-DEC-4
4-fold switch decoder
with four bi-stable relays of 4A switching
current each and free programmable decoder address.
RM-88-N
16-fold feedback module (such as Märklin s88 switching
against ground
) for the
s88-standard connection
and
s88-N
.
RM-88-N-O
16-fold feedback module
with
galvanic separated opto
coupling
inputs for high
interference protection
and for
potential separation
.
For s88-Standard Connection and
s88-N
.
RM-GB-8-N
8-fold feedback module
with
8 integrated track occupancy
detectors
for a max.
current load of 3 Ampere (peak current
of up to 7 Ampere)
for s88-standard connection and
s88-N
.
All components are available as easy to assemble
complete
kits
as
finished modules
or as
finished modules in a case
.
