LD DIDACTIC GMBH
•
Leyboldstrasse 1
•
D-50354 Hürth
•
Phone (02233) 604-0
•
Fax (02233) 604-222
•
E-Mail: [email protected]
© by LD Didactic GmbH
Printed in the Federal Republic of Germany
Technical alterations reserved
02/18-W2013-Wei
Instruction Manual 739 708
Sensor Panel 2
1
Connections Plus Terminal 30 and Terminal 15
2
Slot for CAN Terminating Resistance STE
120
Ω
3
Connections and Fuses
4
Connection Socket CAN H and CAN L
5
Display for a Lack of Short-circuit to Ground
6
Sensitivity Adjustment and Output Signal for
the Knocking Sensor with Display
7
Short-circuit to ground Terminal 31
8
Sensor for Low Pressure
9
Sensor for Accelerator Position
10
Sensor for the Neutral Position of the Transmis-
sion
11
Sensor for Brake Pedal
12
Connection for Knocking Sensor
1
Description
This device is used to examine the operation of various
analog and digital sensors.
The device is equipped with original sensors for monitoring
the differential pressure of a DPF as well as for detecting
the position of the accelerator pedal, the neutral position
of the transmission, and the brake pedal. The
knocking
sensor 739 03
can also be connected to it. The device is
intended for use in educational institutions. Use in a real
vehicle (including use of individual components) is not per-
mitted.
Safety Note
2
Scope of the delivery
Sensor panel 2, 739 708
Not included, but recommended accessory equipment:
•
Set of 10 magnets
689 0815
•
CAN-Databus-Multi-Adapter
773 961
•
Knocking sensor
739 03
•
PVC tubing, 7 mm diam., 1 m
667 193
•
Hand vacuum pump
375 58
•
Automotive fault simulator
738 491
•
Connecting leads, set of 7
739 195
-
The device is appropriate for interior use only!
-
Use only safety bridging plugs and safety connec-
tion leads!
-
Be careful not to short-circuit the power supply.
Fire hazard!
-
The device should only be used for training pur-
poses. Installation in an actual vehicle is prohib-
ited!
7 8 9 10 11 12
4
3
1
2
6
5
