background image

  1

 3 

 2 

 4 

 6 

 7 

 5 

PV-RC10FHD

TV 1080p Remote Control Covert DVR

Quick Guide

LawMate, innovation never stops

®

V1.0

3. LED Indicators

2. Package Content

 

4. Battery Charging

 

LED Indicators

Device Status

Solid Red LED

Recording on

Red LED Blinks Once

      Snapshot

Blinking Red LED

Memory Card Full

      Solid Blue LED 

  Power On

Solid Green LED

Device Charging

 

    

Blinking Blue LED

No Memory Card

Solid Bright Green LED

   Overwrite On

5. Format Memory Card

1. Insert the memory card as shown in the illustration.

2. Press & hold on       then power on the device.

3. You will see the Red LED blinking when the memory card 

     is being formatted. The Red LED will be off when the 

     memory card format is completed. 

    

2

1. Name and Parts

1

2

3 4

5

6

7

8

9

10

11

12 13

1. Power switch

2. Format Button    

3. Photo/Rec Switch

4. HD/FHD Switch

5. Overwrite Switch

6. Reset Button

7. Memory Card Slot

8. USB Port

  9. PIR Sensor

10. Rec(Red)LED

11. Overwrite(Bright Green)LED

12. Charging(Green)LED

13. Power(Blue)LED

3.7V Li-ion BATTERY

BA-PV900

CAUTION

Li-ion

Slide the battery into place at approximately 15 degree to avoid 

damaging the golden connectors on the units.

1. Remove the battery cover from back.

2. Slide the battery into battery tray.

3. Close the battery tray with battery cover.

4. Connect the USB cable to the base.

5. Plug the USB cable to the PC or other USB power 

    source ( the green LED will turn on ).

6. Leave the DVR charging until the green LED is turned off. 

6. Operation

    

7. Download Videos and Photos from DVR

8. Others

Please be noted that you have to turn off the device first 

before you change the Photo/Rec mode.

The device may crash if you suddenly change the mode 

with the power on. 

1

4

3

1.Slide the Power switch     to the left.

2. Select operation mode by sliding Photo/Rec switch      to place.

    2.1 Rec: Whenever the PIR sensor is triggered, the DVR

          automatically starts recording. Please note the length of

          video varies from 5 seconds to 2 minutes depending on

          the movement detection.

    2.2 Photo: The device takes 3 photos whenever the PIR

          sensor is triggered.

3. Resolution setting by sliding HD/FHD switch       to place.

    3.1 Video resolution: HD(1280X720@30fps)

                                      FHD(1920X1080@30fps)

    3.2 Photo resolution: 2MP(1600X1200 .JPG)

1. Video and photo files are stored in the memory card.

2. There are two ways to download video/photo files.

    2.1 Using memory card reader to download video/photo files.

    2.2 With the device powered on and memory card inserted,

          connect the device to PC by USB connection. It will be

          recognized by PC as an external drive for user to

          download the video recordings and photo files.

Built-in image sensor

1/3" progressive CMOS sensor

Sensor resolution

2304x1536

Sensor sensitivity

3.3 Lux @ F 2.0 

Lens F/No.

F 3.2

Focal Length

4mm 

Angle of View

66°

Algorithm 

H.264, JPEG

File Format 

MOV, JPG

Video recording mode

Manual & Auto

Recoreding Capability

1920x1080 / 1280x720

Frame rate 

Up to 30 fps 

Photo Capability

5M

Memory type

Micro SD Card ( Support SDHC max.32GB)

Data interface

Mini USB 2.0

Date/Time Table

YYYY/MM/DD, HH:MM:SS

Power Input

DC 5V

Power Consuption

250mA-390mA

Standby Consuption

About 5.2mA

Standby time

8 days

Battery Input

DC 3.7V / 1100mA polymers battery

Dimension

17 x 5 x 1.5 cm

Weight

110 g

Misc.

Power

Physical

PV-RC10FHD

Video Spec.

Storage & I/O

Built-in Camera Module

9. Specification

1.Detection Range

2.Detection concerns

They may fail to detect successfully if a heat source other than a 

human being is detected or if there are no temperature changes in or 

movement of a heat source. Care must generally be taken in the 

following cases. The performance and reliability of the sensors must 

be checked out under conditions of actual use.

2.5

8.202

5m

16.404ft

19

0

19

0

0

0

 2.5

1.25

     0

1.25

2.5m

8.202

 4.101

     

 4.101

8.202ft

2m

5m

5.562ft            16.404ft

X

TOP VIEW

0

0

 2.5

1.25

     0

1.25

2.5m

8.202

 4.101

     

 4.101

8.202ft

5.562ft            16.404ft

SIDE VIEW

2.5

8.202

5m

16.404ft

11

0

11

0

2m

5m

Y

PIR Sensor Illustration

3.Installation Suggestion

For example: To film a man at 180cm height in the video, the sensor

should be placed at 90cm height above the ground and the man is 3.6m

away from the sensor.

90CM

3.6M

180CM

O

H

D

<1>Cases where a heat source other than a human being is detected
         (1) When a small animal enters the detection range.
         (2) When the sensor is directly exposed to sunlight, a vehicle’s

              headlights, an incandescent light or some other source or far

              infrared rays.
         (3) When the temperature inside the detection range has changed

              suddenly due to the entry of cold or warm air from an

              air-conditioning or heating unit, water vapor from a humidifier, etc.

<2>Cases where it is difficult to detect the heat source.
         (1) When an object made of glass acrylic or other subject which far

              infrared rays have difficult passing through is located between

              the sensor and what is to be detected.
         (2) When the heat source inside the detection range hardly moves or

              when is moves at high speed.

Definition:

O - the height of object

H - the height of sensor

      from the ground

D - the distance between

      object and sensor

Formula:

H - O / 2

D - O x 2

4GB

Lock

Adapter

 Memory Card

USB cable

 

Li-ion Battery

3.7V Li-ion BATTERY

BA-PV900

CAUTION

Li-ion

Slide the battery into place at approximately 15 degree to avoid 

damaging the golden connectors on the units.

User manual

PV-RC10FHD

TV 1080p Remote Control Covert DVR

Quick Guide

LawMate, innovation never stops

®

V1.0

Reviews: