© Lanner Electronics Inc. All Rights Reserved. All product specifications are subject to change without notice.
1U Fixed Rackmount Rail Installation Guide
The rackmount rail kit can be purchased as an accessory for existing systems
including models: NCA-5520 & NCA-5310.
You can mount the network appliance on four posts in a 19-in rack or cabinet by
using the rackmount kit.
The rackmount kit contains the following items:
2x Fixed Brackets
2x Adjustable Brackets
2x M3 Flat-head screws for
NCA-5520
6x M4 I-head screws for
NCA-5310
2x M4 Flat-head screws for
NCA-5310
Ensure that you have the following parts and tools available:
2x Mounting Ears (Included with the system)
6x Flat-head screws for Mounting Ears (Included with the system)
8x Rack-mounting screws
1x Number 2 Screwdriver
Note:
1.
Installing the system in a rack requires two people: one person lifts and holds the
system, while the second person secures it to the rack.
2.
Make sure the rear of the system is supported throughout the installation process.
3.
When installing multiple systems in one rack cabinet, install the lowest one first
and proceed upward in the rack.
1.
Attach the mounting ears to the front of the system chassis, using three (3) flat-
head screws for each side. Next, attach the fixed brackets to the sides of the
system.
For
NCA-5520
, align the fixed bracket keyholes to the built-in three (3)
shoulder screws on the side of the system. Slide and lock the fixed bracket in
place and use one (1) M3 flat-head screw to secure. Repeat for the other side
of the system.
For
NCA-5310
, secure three (3) M4 I-head screws on the side of the system,
acting as shoulder screws. Align the fixed bracket on the side of the system,
then slide and lock the fixed bracket in place and use one (1) M4 flat-head
screw to secure. Repeat on the other side.
Shoulder screws
Shoulder screws
