VFD-V & VFD-Hz function
Display Hold function
TM
?
AutoCheck Voltage & Ohms
?
?
5ms CREST-MAX capture mode (Peak Hold)
?
Autoranging Relative -Zero mode
?
í
í
Jaw Opening :
55mm max.
í
Display :
3-5/6 digits 6000 counts &
3½ digits 1,999 counts for Hz.
í
Update Rate :
5 per second nominal
í
Polarity :
Automatic
í
Low Battery :
Below approx 2.4V
o
o
í
Operating Temperature :
0 C to 40 C
í
í
Sensing :
TRMS sensing
Relative Humidity :
Maximum 80% R. H.
o
for temperature upto 31 C decreasing linearly
o
to 50% Relative Humidity at 40 C
o
o
Storage Temperature :
-20 C to 60 C,
< 80% R.H. (With battery removed)
SPECIAL FEATURES :
GENERAL SPECIFICATIONS :
SAFETY :
An ISO 9001:2008 Company
®
nd
?
Double insulation per IEC/EN61010-1 2 Ed.,
nd
UL61010-1 2 Ed., & CAN/CSA C22.2
No.61010.1-0.92 to Category
CAT IV 1000V AC & DC.
?
Transient Protection :
12 kV (1.2/50
m
s surge)
?
Overload Protection :
Clamp-on jaws
: 2000A rms continuous
“ + ” & COM Terminals (all other functions) :
1000V rms.
Note: All Specification are Subject to change without prior notice.
Contd....2
AC / DC TRMS Clamp-On Multimeter with
VFD, EF-Detection & PC Interface
Model KM 2777 - TRUE RMS SENSING
?
EF-Detection (NCV)
?
Backlight LCD Display
?
Auto Power Off
?
Diode Test & Continuity Test
?
PC Interface (Optional)
ELECTRICAL SPECIFICATIONS : KM 2777
o
o
Accuracy is ± (% readings number of digits) or otherwise specified, at 23 C ± 5 C & less than 75% R.H.
True RMS Model KM 2777 voltage accuracies are specified from 5% to 100% of range or otherwise specified.
Maximum Crest Factor <1.4:1 at full scale & <2.8:1 at half scale, & with frequency components
within the specified frequency bandwidth for non-sinusoidal waveforms.
í
í
í
í
í
í
í
í
í
í
Optional Accessories :
USB interface kit BRUA-19X,
Altitude :
Operating below 2000m
Temperature Coefficient :
nominal 0.15 x (specified accuracy) / °C @
o
o
o
o
(0 C--18 C or 28 C--40 C), or otherwise specified
Power supply :
Standard 1.5V AAA Battery x 2.
Power Consumption :
Typical 14mA for Current function,
& 5.2mA for others.
APO Timing :
Idle for 34 minutes
APO Consumption :
10
m
A typical
Dimension :
264(L) x 97(W) x 43(H) mm
Weight :
Approx. 608gm.
Accessories :
Test leads (pair), user’s manual, Bkp60 banana plug
K-type Thermocouple x 1 & carrying case.
BKB32 banana
plug to type-K socket plug adaptor
?
Pollution degree :
2
?
EMC :
Meets EN61326-1:2006 (EN55022,EN61000-3-2,EN61000-3-3,
EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5,EN61000-4-6,
EN61000-4-8,EN61000-4-11)
In an RF field of 3V/m :
Capacitance function is not specified
Other function ranges : Total Accuracy = Specified Ac 200 digits
Performance above 3V/m is not specified.
ACA CURRENT(Clamp on)
1)
Accuracy
Resolution
Range
True RMS Crest Factor :
< 1.4:1 at full scale & <2.8:1 at half scale
1)
Induced error from adjacent current carrying conductor :
<0.1A/A
±(2.0%rdg + 5dgts)
50Hz – 60Hz
200.0 A
0 ~ 500 A
500~2000 A
±(2.5%rdg + 5dgts)
±(3.0%rdg + 5dgts)
±(2.5%rdg + 5dgts)
40Hz~50Hz & 60Hz~400Hz
200.0 A
0 ~ 500 A
500~1000 A
±(3.0%rdg + 5dgts)
±(3.5%rdg + 5dgts)
1000~2000 A
Unspecified
DCA CURRENT(Clamp on)
1)2)
Accuracy
Resolution
Range
1 )
Induced error from adjacent current carrying conductor :
<0.1A/A
2 )
Specified with Relative Zero mode applied to offset the
non-zero residual readings, if any.
?
±(2.0%rdg + 5dgts)
200.0 A
0 ~ 500 A
500~2000 A
±(2.0%rdg + 5dgts)
±(2.5%rdg + 5dgts)
DC + ACA CURRENT(Clamp on)
1)2)
Accuracy
Resolution
Range
True RMS Crest Factor :
< 1.4:1 at full scale & <2.8:1 at half scale
1)
Induced error from adjacent current carrying conductor :
<0.1A/A
2 )
Specified with Relative Zero mode applied to offset the
non-zero residual readings, if any.
?
DC, 50Hz ~ 60Hz
200.0 A
2000 A
±(3.0%rdg + 8dgts)
40Hz ~ 50Hz & 60Hz ~ 400Hz
200.0 A
0 ~ 1000 A
1000~2000 A
±(3.5%rdg + 8dgts)
Unspecified
Preliminary Data
D:\Chhaya\My Documents\Chhaya\backup\catlog\New cat\KM 2776-KM 2777.cdr
100 mA
1 A
1 A
100 mA
1 A
1 A
1 A
100 mA
1 A
1 A
100 mA
1 A
100 mA
1 A
1 A
