background image

10. Then insert auger to  

  juicer house.

Copyright © Konstar Industries Limited. All rights reserved.

KONSTAR products are patent registered. We will and have taken legal action

against any infringement or unauthorized reproduction, or any portionof it.

www.konstar.hk

手動原汁機

手动原汁机

K S 0 1 5 8 M

Wash before the first use.

Use, wash and store with care! Keep out of reach of children!

Use on dry, clean and flat surface.

Cut food into small pieces. Do not overfill.

Cups are for food processing, not suitable for food storage.

Do not insert fingers during use! Use pusher for safety.

Wash and dry immediately after use to avoid staining.

Clean suction base with damp cloth. Do not soak.

Do not use corrosive cleaning products. Do not excessive use of detergent.

Top rack dishwasher and dish sterilizer safe. Set temperature below 65°C / 150°F.

Keep away from high heat. Do not use in oven or microwave oven.

U S E   &   C A R E  

首次使用前清洗干净

小心使用!避免孩童接触。

在干爽、清洁及平滑的表面上使用。

先将食物切成小块,勿过量装放。

容器用作处理食物,不适用于贮藏食物。

使用时, 切勿用手接触螺杆!使用压棒以保安全。

为免被食物色素染色,使用后应立即清洗并擦干。

使用湿毛巾清洁底座,切勿用水浸泡。

切勿使用腐蚀性清洁剂及过量使用清洁剂。

可放入洗碗机及消毒碗柜的上层清洗,设定温度低于65°C / 150°F。

远离高温,切勿放入微波炉及烤箱使用。

使用指引: 

首次使用前清洗乾淨

小心使用!避免孩童接觸。

在乾爽、清潔及平滑的表面上使用。

先將食物切成小塊,勿過量裝放。

容器用作處理食物,不適用於貯藏食物。

使用時, 切勿用手接觸螺桿!使用壓棒以保安全。

為免被食物色素染色,使用後應立即清洗並擦乾。

使用濕毛巾清潔底座,切勿用水浸泡。

切勿使用腐蝕性清潔劑及過量使用清潔劑。

可放入洗碗機及消毒碗櫃的上層清洗,設定溫度低於65°C / 150°F。

遠離高溫,切勿放入微波爐及烤箱使用。

使用指引:

M A N U A L   J U I C E R

Not suitable for very hard, very soft, juiceless and low-fiber fruits and vegetables, e.g., coconut, sugar cane,  

  tomato, etc.

Remove hard seeds before juicing.

Peel citrus fruits before juicing.

For hard food, e.g. carrot, do not operate more than 5 minutes continuously.

Do not push hard when using pusher. In case of stuck, turn handle counter-clockwise to release juice

  and pulp. 

P L E A S E   R E A D   I N S T R U C T I O N   M A N U A L   B E F O R E   U S E

Rubber Ring

(1 spare included)

Juicer Head

Pulp Nozzle

Juicer Head 

Screw

Juicer Auger

Stopper

Spout

Pusher

Pulp Cup

Juicer Cup

Sieve

Juicer House

Handle

Lock

Suction Base

T I P S

T O   I N S TA L L   J U I C E R   H E A D

1. Screw pulp nozzle    

  onto juicer head.

2. Insert juicer head into  

  juicer head screw.

3. Install rubber ring to   

  juicer head. 

4. Then install spout.

5. Clean the bottom of   

  suction base before   

 use.

6. Insert juicer house into  

  suction base.

7. Turn clockwise to lock  

  juicer house and    

  suction base.

8. Attach stopper to    

  auger, 4 ribs face    

 outwards.

11. Attach assembled    

  juicer head.

12. Screw on juicer head  

  as arrow indicated.   

  The spout faces    

 downwards.

9. Fit the 4 ribs of  

 

  stopper to the slots   

  at the end of juicer    

 house.

13. Install handle.

14. Place pulp cup in    

  front of juicer cup.    

  Place food in juicer  

  house. Turn handle  

  clockwise to start    

 juicing.

15. Adjust pulp nozzle   

  for dryness of pulp.

16. Move pusher slightly  

 

to drive food into    

 

auger. Turn handle   

 

counter-clockwise   

 

occasionally to  

 

 

release juice and    

 pulp.

T O   C L E A N

To clean after use, keep the base locked on to remove juicer head and auger (push to remove stopper), then 

unlock the base to remove the juicer house.

Reviews: