E-1
INSTALLATION MANUAL
A10U955000
FS-528
Finisher
Applied Machine: 950
MFP: 95ppm
Product Code: A0Y5
I. Accessory parts
II. Confirmation before installation
Note:
1. When transporting the Finisher, be sure to move
it in the direction illustrated below so as not to
deform the casters on the paper exit tray side.
2. Choose a horizontal and stable floor for installing
the machine.
3. When installing optional Post Inserter/Punch kit
to the Finisher, be sure to install it beforehand,
then install the finisher to the copier machine.
III. Installation procedure
1. Turn the Sub and Main power switches OFF, and
unplug the power cord from the outlet.
2. Remove the connector cover on the left side
cover of the machine. (1 screw)
No.
Name
Shape
Q’ty
1. Machine
installation
plate/lower
15JMIXC001SA
1
2. Machine
installation
plate/upper
15JMIXC002SA
1
3. Paper exit
up-down tray
15JMIXC003SA
1
4. Paper exit
tray /1
15JMIXC004SA
1
5. Knob screw
2
6. TP screw
M4x6
2
7. TP screw
M4x14
2
8. Truss screw
M4x8
2
9. Fixing material
15JMIXC005SA
1
10. Installation
manual
1
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take a
good position of not being excessively loaded.
(mass: approx. 65kg)
OK
NG
15JKIXC001SA
A10UIXC001CA
Connector cover
