E-1
INSTALLATION MANUAL
4521-9550-00
FS-511
Finisher
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take a
good position of not being excessively loaded.
(mass: approx. 39.2 kg (86-1/2lb))
I. Accessory parts
II. Precautions
1. Choose a horizontal and stable floor for installing
the machine.
2. Install the Relay Unit before installing the Finisher
in the main body.
3. To move the apparatus after installation, always
remove the connector and the rail from the Fin-
isher and remove the rail from the main body.
After the Finisher has been relocated, attach the
rail back again by following the steps given in
“Attaching the rail.”
4. When moving the Finisher press the side oppo-
site to the tray to prevent the Finisher from top-
pling over.
No.
Name
Shape
Q’ty
1. Rail
1
2. Rail Guide
1
3. Ground Plate
1
4. Fixing bracket
A
2
5. Fixing bracket
B
2
6. Positioning pin
1
7. Spacer
1
8. Tray
1
4683IXC505DA
4684U061AB
4684U062AA
4521IXC001DA
4521IXC002DA
4521IXC003DA
4583U018AA
4684U075AA
9. Protective
Guide
1
10. Bind screw
(M4x10)
2
11. SEMS II screw
(M4x12)
4
12. TP screw
(M4x8)
2
13. Label
1
14. Installation
Manual
1
set
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
No.
Name
Shape
Q’ty
4684U070AA
4521IXC004DA
4521IXC005DA
4521IXC023DA
4980IXC019DA
Applied Machines: 500/420
MFP 50 ppm/42 ppm
