background image

-1-

1044886-T01-A

BEFORE YOU BEGIN

BEFORE YOU BEGIN

STILLNESS

INSTALLATION INSTRUCTIONS

TOWEL WARMER (WALL-MOUNT)

K-45130T

!

!

Congratulation on your purchase of this high quality
Bathroom Accessory. Before proceeding with the
installation, please carefully read this installation
instruction in order to ensure proper care and assembly of
this accessory.

Please keep this installation instruction for future reference.

CAUTION:

WARNING: Risk of electrical shock.

Prior to drilling into walls, check there are

no hidden electrical wires, cables or water supply
pipes with the aid of ar, electronic detector. If you use
power tools do not forget:
1. Wear eye protection.
2. Unplug equipment after use.

Connect only to

a circuit protected by a Ground-Fault Circuit-
Interrupter (GFCI) or Earth-Leakage Circuit-Breaker
(ELCB).

1.
2.

GFCI

ELCB

!

!

IMPORTANT INFORMATION

IMPORTANT INFORMATION

NOTE:

CAUTION:

CAUTION:

Unplug when not use the product.

This appliance is not intended for use by young

children or infirm persons without supervision. Towel warmer
must be installed so that the buttom rail is at least 600mm
above the floor to avoid a hazard for children. The cord
extension set must be positioned so that it is not subject to
splashing or ingress of moisture.

This towel warmer is intended only for drying

textiles that have been washed in water. Fabrics that contain
soap or detergent residue (or any other liquid or substance)
may discolor and show what appear to be scorch marks.
However, this is simply discoloration of the residue or
substance. The towelwarmer does not reach sufficient
temperature to scorch fabric when operated correctly.

600

WARNING: When using electrical products, basic
precautions should always be followed, including
the following:

WARNING: Risk of electric shock.

WARNING: Risk of electric shock.

WARNING: Risk of injury or property damage.

A licensed

electrician should make all electrical connections.

Disconnect

power before servicing.

Please read all instructions thoroughly before
beginning installation, including the following
requirements.

KOHLER CHINA INVESTMENT CO., LTD

NO.158, JIANG CHANG SAN ROAD,

JING'AN DISTRICT, SHANGHAI, PRC

POST CODE: 200436

(

)

158

200436

©

©

Copyright Kohler China Investment Co., Ltd. 2016

2016

1190155-T01-C

Summary of Contents for STILLNESS K-45130T

Page 1: ...Towel warmer must be installed so that the buttom rail is at least 600mm above the floor to avoid a hazard for children The cord extension set must be positioned so that it is not subject to splashing or ingress of moisture This towel warmer is intended only for drying textiles that have been washed in water Fabrics that contain soap or detergent residue or any other liquid or substance may discol...

Page 2: ...onductor supplying this equipment Pressure wire connectors are provided on the exterior of the junction box or control within this unit to permit connection of a bonding conductor between this unit and all other exposed metal in the vicinity as needed to comply with local requirements The power line is 150cm long Please pre install a three pin socket complying with Chinese national standards It is...

Page 3: ...eon and place the towel warmer to the desired place on the wall for installation 2 Mark the screw holes for the wall hung bracket with a pencil See Fig A 3 Drill holes at the place marked in step 2 with a 6mm drill and insert wall plugs 4 Fix the wall hung bracket onto wall with screws See Fig B 1 2 A 3 6mm 2 4 B Fig A A Fig B B Screw Towel Warmer Wall hung Bracket Wall hung Bracket 1190155 T01 C ...

Page 4: ...hed with warm water and a soft cloth or sponge Do not use abrasive cleaners or cleaners containing bleach 2 Turn off power supply prior to removing outer case 3 Do not use eradicator abrasive powder or oil acid or alkali liquid detergent for cleaning 4 Do not bump the casing 5 For indoor installation and use only 1 2 3 4 5 CARING FOR YOUR PRODUCTS CARING FOR YOUR PRODUCTS Fig D D Power line is 150...

Reviews: