Installation Instructions
Vario Pan Connector
12504A-NA
Important: Installation of this Vario Connector must be done in accordance with
AS/NZS3500.1.
This connector must be installed with a pan collar (straight or offset). Your plumber
can provide this if it is not supplied.
The Kohler Vario Pan Connector can be used for S-trap toilet pan installations. For
pans with a P-trap outlet, it converts the toilet pan from a P-trap to S-trap.
Depending on the pan geometry, this Vario Pan Connector is suitable for set-outs
ranging from 90mm to ≈140mm with a 20mm offset pan collar.
Ensure to maintain a minimum of 30mm overlap between the pan spigot and the
Diaphragm Seal.
1109493-A02-E 23/09/15
