®
®
Koala Kidsitter
®
Strap Replacement Instructions
Materials Supplied:
Three #8-32 3/8” Phillips Pan Head Machine Screws
Tools Required:
Phillips Head Screwdriver
1.
Position the KidSitter
®
so that it is in the infant
car seat carrier position. Release the strap from the
buckle on the outside of the high chair leg.
3.
On the right leg, loosen the screw securing the
strap to the chair. Discard the old strap and screw.
4.
Take the new clip and position it on the left leg so
that slot in the clip aligns with the two holes on the
left leg. The plastic lever should be at the top of the
clip. Using a Phillips Head Screwdriver, secure the clip
to the leg with two of the screws provided.
2.
Locate the plastic clip on the left leg and open it so
that the two screws securing it to the leg are exposed.
Using a Phillips Head Screwdriver remove the two
screws. Discard the old clip and screws.
Instructions Continued on the Back
