www.kmwcomm.com
KMW Antenna Installation Guide
For antenna model ET-X-TU-42-15-37-18-iR-RA
General Information for Adjustable Clamp
Weight
13.2lbs [6.0kg]
Material
Adjustable Clamp
Hot-dip galvanized steel [SS400]
Bolts & Nuts
STS304
Mounting Pole Diameter
Ø3.0~5.0inch [Ø76.2~127.0mm]
Bolts/Nuts
Required Tool
Recommended Torque
M8 Socket head bolt
(to attach bracket onto the back of an antenna)
6mm Hex Wrench
120 kgf.cm
104 lbf.in
11.8 Nm
M10 Hex. Head bolt
(to mount a bracket to the pipe)
17mm spanner
240 kgf.cm
208 lbf.in
23.5 Nm
M8 Hex. Head bolt
(to securely hold bracket into a desired tilt )
13mm spanner
350 kgf.cm
304 lbf.in
34.5 Nm
Step 1
Step 2
Antenna Height
“L”
Adjustable angle
48”
1122mm
20°
KMW Communications Inc.
Base Station Antennas
For Mobile Communications
Up part
Down part
“L”
1. Open the antenna box and take out the adjustable clamp.
2. Inspect all the parts
3. Assemble the Up/Down part onto the antenna using M8
socket head bolt & plain/spring washer
1. Assemble an upper fixed clamp with M10 Hex. Head bolts provided.
2. Tighten the fixing clamp using the double nut & plain / spring washer.
3. Assemble the lower fixed clamp same as above.
