background image

20EK-064E R1

ADVICE FOR USE & CARE

1. Clean the scale with slightly damp cloth. DO NOT immerse the scale in 
    water or use chemical/corrosive cleaner. Keep the scale in cool dry place.
2. All plastics parts should be cleaned immediately after contact with fats, 

    spices, vinegar and strongly flavored/colored foods. (Avoid contact with 

    acids citrus juice.)

3. Always use the scale on a solid, flat surface, keep the scale unmoved 

    when weighing.

4. This product is precision instrument, please handle with care; Do not strike, 
     shake or drop the scale.
5. If fail to turn on, please check whether battery(ies) are installed or battery 

    power is low.
6. Keep away from high temperature, do not strip the scale arbitrarily.
7. Designed for family use only, not for commercial use.

MANUALLY SHUT OFF

AUTO OFF (BATTERY POWER SAVING MODE)

If there is no operation or weight changing in
two minutes, scale will be auto off.

To maximize battery life, press and hold for 
seconds to turn off the scale after using.

43117161

SLIM LINE 

SCALES

Summary of Contents for anko SLIM LINE

Page 1: ...he scale unmoved when weighing 4 This product is precision instrument please handle with care Do not strike shake or drop the scale 5 If fail to turn on please check whether battery ies are installed or battery power is low 6 Keep away from high temperature do not strip the scale arbitrarily 7 Designed for family use only not for commercial use MANUALLY SHUT OFF AUTO OFF BATTERY POWER SAVING MODE ...

Page 2: ... the battery down first and pressing down the other side Please observe the polarity Division for high precision scale The above table is for indicative only Each product differs from one to another For actual division please refer to the product label 1 Above buttons are for indicative only 2 UNIT button for some items are on bottom of the scale please set the unit there if needed 3 Buttons and ar...

Page 3: ...n the scale 2 Press button to turn on the scale 3 Start weighing when LED shows 0 Press UNIT button to convert to weighing mode 4 Load weighing object on scale or bowl to start weighing LED will show the weight reading Load weighing object WARNING Bluetooth connection Power OVER LOADED WARNING When LED shows Err it is over loaded Max capacity is shown on product please take off the loads to preven...

Page 4: ... scale get weight reading Press button to reset the LED reading to 0 before adding next load You can repeat this operation Condition 1 ZERO function When total sum of all loads on scale 4 of scale s max weight capacity LED will show or Og each time is pressed means not stable please wait for a moment Og and meanwhile an icon o on the LED mean ZERO function is activated Max weight capacity remains ...

Reviews: