background image

Oasis Shelter

Model No. KC074-800

Your shelter includes:

1 x solid wall
8 x pegs
4 x ropes
4 x black STEEL poles (5570mm x 19mm)
1 x black STEEL pole (3280mm x 19mm)
2 x black STEEL peak connector poles (1630mm x 19mm)
1 x centre hub (connector)
4 x pad feet

FIRE SAFETY WARNING

1.  KEEP ALL FLAME AND HEAT SOURCES AWAY  

FROM THIS TENT FABRIC!

2.  Never place your stove, campfire, heater or 

other flame source in or near your shelter.

3.  Never cook, light or refuel a stove or other heat 

source in or near your shelter. 

Do not operate gas appliances in your shelter.

4.  Do not hang lights or heating devices near the 

walls of your shelter.

5.  Maintain adequate ventilation inside your 

shelter at all times.

6.  Familiarise yourself with the fire safety rules 

and regulations of the grounds where you are 

camping.

7.  Keep children away from all heat and fire 

sources.

8.  Do not store flammable liquids inside your 

shelter.

9.  Do not smoke in your shelter.
10. Extinguish or turn off all appliances, fires and 

heat sources before going to sleep.

11. Never use aerosols or insect repellent sprays 

in or around the fabric of your shelter. It can 

damage the water proofing and is not covered 

by our warranty.

PITCHING INSTRUCTIONS

1.  Select a dry, level site and clear the ground of any 

sharp objects. Remove the shelter from its carry 

bag, untie fabric ties and unroll the shelter.

2.  Assemble peak 

pole with centre 

hub  

(Fig. 1).

3.  Assemble both peak connector poles (Fig. 2).

4.  Insert ends of the peak connector poles into the 

peak pole with centre hub (Fig. 3, 4 and 5).

5.  Partially assemble the four leg poles with ridge 

hub (Fig. 6).

 

Note: Do not assemble the last pole on each side 

of the ridge hub at this time.

6.  Insert end of peak connector pole into ridge lug 

(Fig. 7 and 8). Repeat for the remaining three leg 

poles with ridge hub.

 

Note: Make sure metal pin locks into slot on top of 

ridge hub, you may have to twist peak connector 

from side to side.

Fig. 2

Fig. 3

Fig. 1

Fig. 5

Fig. 8

Fig. 7

Peak Connector
Pole

Metal Pin

Slot

Fig. 6

Ridge Hub

Fig. 4

Center Hub

Reviews: