background image

INSTALLATION INSTRUCTIONS

C

ommerCial

-S

tyle

 G

aS

 C

ooktop

 

30" (76.2 

Cm

), 36" (91.4 

Cm

), 

and

 48" (121.9 

Cm

For residential use only

INSTRUCTIONS D’INSTALLATION

t

able

 

de

 

CuiSSon

 

au

 

Gaz

 

de

 

Style

 

CommerCial

 

de

 

30 

po

 (76,2 

Cm

), 36 

po

 (91,4 

Cm

et

 48 

po

 (121,9 

Cm

Pour utilisation résidentielle uniquement

Table of Contents / Table des matières

W11179813A

COOKTOP SAFETY ........................................................................2
INSTALLATION REQUIREMENTS .................................................4

Tools and Parts .............................................................................4
Location Requirements ................................................................5
Electrical Requirements: U.S.A. Only ..........................................8
Gas Supply Requirements ...........................................................8

INSTALLATION INSTRUCTIONS .................................................10

Install Cooktop ...........................................................................10
Make Gas Connection ...............................................................10
Install Griddle Tray ......................................................................11
Complete Installation .................................................................12

GAS CONVERSIONS ....................................................................13

Propane Gas Conversion ...........................................................13
Natural Gas Conversion .............................................................16

SÉCURITÉ DE LA TABLE DE CUISSON .....................................19
EXIGENCES D’INSTALLATION ...................................................21

Outils et pièces ...........................................................................21
Exigences d’emplacement .........................................................22
Spécifications électriques : É.‑U. seulement .............................25
Spécifications de l’alimentation en gaz .....................................25

INSTRUCTIONS D’INSTALLATION .............................................27

Installation de la table de cuisson ..............................................27
Raccordement au gaz ................................................................27
Installer le plateau d’égouttement .............................................28
Terminer l’installation ..................................................................29

CONVERSIONS POUR CHANGEMENT DE GAZ ......................30

Conversion pour l’alimentation au propane ..............................30
Conversion au gaz naturel .........................................................33

IMPORTANT:

Save for local electrical inspector’s use.

Installer:

 Leave installation instructions with the homeowner.

Homeowner:

 Keep installation instructions for future reference.

IMPORTANT :

Conserver ces instructions à l’usage de l’inspecteur des installations électriques local.

Installateur :

 Remettre les instructions d’installation au propriétaire.

Propriétaire :

 Conserver les instructions d’installation pour référence ultérieure.

www.kitchenaid.com (U.S.A.) www.kitchenaid.ca (Canada)

Summary of Contents for W11179813A



















Reviews: