background image

FOREWORD

 

Make sure to read this manual carefully and keep it handy for future reference.

 

When leasing or transferring this tractor, deliver this manual together with the tractor.

 

The specifications in this manual are subject to change without notice.

< NOTE >

Congratulations, and welcome to the fabulous world of 

DK6010 

ownership, where serious work is made fun 

again! 

This versatile tractor is a culmination of the entire tractor and diesel engine knowledge gained by the Dae

-

dong Industrial Co.,LTD over the years since 1947. The 

DK6010 

and has been designed with the finest ma

-

terials and under rigid quality control standards  set forth by the 

KIOTI

 Engineering Department.

Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new 

owner's familiarize themselves with the 

KIOTI DK6010

, it is the policy of 

KIOTI

 tractor to provide an owner's 

manual which includes helpful information about tractor safety, operation and maintenance. If the information 

you seek is not found in this manual, your 

KIOTI

 tractor dealer will be happy to help you. 

Please feel free to contact 

DAEDONG IND. CO.,LTD

 with your questions/concerns. 

TD210-EEC인증용-DK6010H,DK6010C,DK61   1

2018-12-26   오전 10:30:38

Summary of Contents for DK6010



















































































































































































































































Reviews: