background image

Infrared thermometer 

KIRAY 200

 

is an infrared thermometer used to diagnose, inspect and check any temperature. Thanks to its 

elaborated  optical  system,  it  allows  an  easy  and  accurate  measurement  of  little  distant  targets. 

KIRAY  200

  instrument  has  an 

internal memory which can save up to 20 measurements.

Make sure that the target is larger than the size of the laser sighting.

TECHNICAL FEATURES

DISTANCE FROM THE TARGET

KIRAY 200

Infrared thermometer

Distance
Diameter

150

300

900

mm

5

10

30

mm

YES

NO

*Accuracy for an ambient temperature from 18 to 28°C (with a relative humidity lower 
than 80% RH)

D:S=30:1
50 mm at 1500 mm

 Instrument features

 K thermocouple probe features

Supplied with 

thermocouple  K probe

Spectral response

8 -14 µm

Optical

D.S : 30:1 (50 mm at 1500 mm) 

Response time

Less than 1 second

Temperature range

From -50 to +850 °C 

Accuracy*

From -50 to -20°C : ±5 °C
From -20 to +200 °C : ±1.5% of reading ±2 °C
From +200 to +538 °C : ±2% of reading ±2 °C
From +538 to +850 °C : ±3.5% of reading ±5 °C

Display resolution

0.1 C °

Emissivity

Adjustable from 0.10 to 1.00
(pre-set at 0.95)

Over range indication

Display indication : « -0L » for a negative over range, 
« 0L » for a positive over range. 

Laser sighting

Wavelength : 630-670 nm
Output < 1mW, Class 2 (II)

Positive or negative
temperature indication

Automatic (no indication for a positive temperature)
(-) sign for a negative temperature 

Display

4 ½ digits with LCD backlighted display

Auto-extinction

Automatic after 7 seconds of inactivity

High/low alarm

Flashing signal on display and beep signal with 
adjustable thresholds

Power supply

Alkaline 9 V battery

Autonomy

38 h (inactive laser and backlight)
15 h (active laser and backlight) 

Use temperature

From 0 to +10 °C for a short period
From 11 to +50 °C for a long period 

Storage temperature

From -20 °C to +60 °C

Relative humidity

From 10% to 90%RH in operating mode and 
>80%RH in storage

Dimensions

175 x 110 x 45 mm

Weight

230 g (included battery)

Memory

20 temperature values with unit of measurement 
(°C or °F)

Temperature range

From -40 to +400 °C

Display range

From -50 to +1370 °C

Resolution

0.1 °C

Accuracy

±1.5% of reading ±3 °C

Cable length

1 m

[email protected]

www.digiparts.ch

DigiParts GmbH

Summary of Contents for KIRAY 200

Page 1: ...g 5 C Display resolution 0 1 C Emissivity Adjustable from 0 10 to 1 00 pre set at 0 95 Over range indication Display indication 0L for a negative over range 0L for a positive over range Laser sighting Wavelength 630 670 nm Output 1mW Class 2 II Positive or negative temperature indication Automatic no indication for a positive temperature sign for a negative temperature Display 4 digits with LCD ba...

Page 2: ...de button Down button 1 2 3 4 Backlight and laser button Infrared sensor Probe input Set continuous measurement On Off Set alarm On Off MODES FLOW CHART MODE MODE bouton mode SET bouton SET ENT gâchette EMS Réglage de l émissivité EMS avec les touche haut et bas Affichage de la température maximum Affichage de la température minimum MODE MODE MODE MODE Affichage de la température différentielle en...

Page 3: ...r To record a temperature you have to be on LOG mode then choose an empty LOG location visible and press SET button during the measurement or when the measurement is fixed HOLD From this mode you can also clear all the recorded temperatures press and keep the trigger pressed and press down button at the same time until reaching the zero recording then press SET button while keeping ENT pressed A b...

Page 4: ...y reflection on reflective surfaces the laser in the eyes Change the batteries when the indicator blinks Do not use the thermometer around explosive gas vapor or dust Do not leave the device with the lock on lock at the top right of the screen because in this configuration the instrument does not turn off automatically non Aprotéger deschamps électriquesetmagnétiqueset del électricitéstatique To p...

Reviews: