Outdoor Pole Operated Sun Shade with PVC Fabric
INSTALLATION INSTRUCTIONS
Bungee Tie Down
(BUN19) x 2
Plug Bracket
(PBNV19) x 1
Crank Bracket
(CBNV19) x 1
Screws
(S09 x 6)
Parts in hardware box (parts not shown to scale)
Customer Service
Contact us at 303.652.6164 for additional information. English speaking customer service representatives are available Monday
through Friday, from 7am - 4pm (MST). Please visit www.ShadeInfo.com to register your shade purchase or to view an installation
video.
We recommend two (2) people install this shade. A power drill, tape measure, leveling device, and Phillips screwdriver bit are
recommended for installation (not included). Some parts shown in this manual may differ slightly than the product you have
purchased.
Part List
Please lay out and take an inventory of all parts prior to assembly. Please give us a call if you are missing any parts. Read the
instructions in their entirety prior to beginning assembly and installation. Note: this shade must be installed into wood studs. If
woods studs are not available, anchoring hardware must be used (not included).
Parts in pole package (parts not shown to scale)
Pole Screw (x2) Lock Washer (large =1pcs)
(small =2pcs)
Ring (x1)
Ring Screw (x1)
Using the Ring Screw, and Large Lock Washer provided in the pole package, attach the
Ring to the Crank Mechanism (Fig. A).
Step 1: Install the Crank Ring
Fig. A
Wall Installation
Ceiling Installation
Fig. B
Fig. C
Your shade can be installed against a wall (Fig B) or against
a ceiling/overhang (Fig C). Your shade brackets are prepared
for a wall installation.
If you would like to prepare your shade for a ceiling installa-
tion, please see the last page of this manual for help preparing
the brackets.
Step 2: Determine Your Installation Type
Pg. 1
