background image

1

 

 

w w w . k b g o o d i c e . c o m  

 

 

 

                           

 

U S E R   I N S T R U C T I O N S

 

 

P o r t a b l e   N u g g e t   I c e   D i s p e n s e r  

 

F D F M 1 J A 0 1  

 

 

 

Safety  Instructions  ----------------------------------

-

-----------------------------------------------2 

Features & Specifications ---------------------------------------------------------------------------4 

Dispenser  Use  ---------------------------------------------------------------------------------------6 

Dispenser Care -------------------------------------------------------------------------------------1

Installations  ----------------------------------------------------------------------------------------1

Troubleshootings  -----------------------------------------------------------------------------------15 

Service & Warranty --------------------------------------------------------------------------------1

 

G E N E R A L   O P E R A T I N G   I N S T R U C T I O N  

 

Read these instructions before use and save them for future reference. 
Let the unit rest and remain unplugged for 24 hours before use. 

 

 

Remove all external and internal packaging materials. Be sure that all parts 

have been included before discarding any packaging materials. You may 
want to keep the packaging materials for use at a later date. 

 

Contact customer service at 800-433-9938 o

[email protected]. 

Summary of Contents for FDFM1JA01

















Reviews: