background image

1

6

5

Remove the rechargeable batteries from their case before use.

Use numbers indicated in parentheses when asking for replacement parts.

AC adaptor (RFEA 417B) ............................................................................................................... 1 pc.
Stereo headphone ............................................................................................................................ 1 pc.
Car adaptor (CA-R455) 

(XL-PV700)

............................................................................................ 1 pc.

Car audio cassette adaptor (CA-RC4/CA-RC5) 

(XL-PV700)

................................................. 1 pc.

Wired remote control ...................................................................................................................... 1 pc.
Rechargeable Ni-Cd batteries (BN-R122) ................................................................................. 2 pcs.
Battery case ....................................................................................................................................... 1 pc.

Supplied Accessories

Check the packing carton for these accessories.

Concerning Compact Discs

VICTOR COMPANY OF JAPAN, LIMITED

Printed in Japan
0399IMMCREPAN

EN

PORTABLE CD PLAYER

XL-PG7/XL-PV700

INSTRUCTIONS

Thank you for purchasing this JVC product. Please read these instructions carefully before starting
operation to be sure to obtain optimum performance and a longer service life from the unit.

Only compact discs bearing this mark can be used with this unit.

However, continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage
the unit.

If moisture has formed on a disc

When moisture has formed because the
disc was brought suddenly into a warm
room from a cold environment, wipe it off
using a soft dry cloth.

When storing discs

Avoid locations which are
• Exposed to direct sunlight.
• Susceptible to high levels of humidity or

dust.

• Directly exposed to heat from a heating

appliance.

• On top of a car dashboard or near the

rear window.

Handling precautions

• On the label side (the side with writing)

Do not write anything using a pencil,
ball-point pen, etc. Do not stick on paper
or labels.

• On the disc (shiny) side

Handle this side carefully to keep it free
from fingerprints or scratches. Do not
use record cleaners, solvents, etc.

• Do not attach labels or stickers to CDs.

Do not use CDs with exposed adhesive
from tape or left over peeled off stickers.

• Do not use scratch-proof protectors or

covers other than those specified for use
with this unit.

If the surface is dirty

Wipe it with a damp cloth and then wipe dry.
Wipe from the center toward the outer circumference.

How to hold a disc

How to store the disc in
its case

How to remove a disc from its case

Label side up

Play surface (shiny surface)

LVT0232-002A [B]

RQT4863-B

Check this

Is the disc properly secured in place?

• Is the unit in HOLD status?
• Is the disc properly secured in place?
• Is there moisture condensation on the lens?

(Wait for about an hour and then try again.)

Did you press the PUSH button to release the disc?

Is the RESUME, NORMAL, RANDOM (play mode) selector
in the NORMAL position?

• Are the headphone plug and the wired remote control

plug inserted all the way?

• Is the plug dirty? (Wipe away dirt on the plug.)

Are you using the unit body too near a TV or tuner? (If the
TV or tuner is connected to a simple indoor antenna,
connect it to an outdoor antenna.)

Problem

Cannot close cover.

Cannot play discs.

Cannot remove disc.

Tracks on disc do not play
in order, starting with the
first track.

Cannot hear music—too
noisy.

TV picture is distorted.
Radio reception is noisy.

Portable CD player

Type

: Compact disc player

Signal detection system : Non-contact optical pickup (semiconductor laser)
Pickup system

: 3 beam laser

Number of channels:

: 2 channels (stereo)

Frequency response

: 20 Hz to 20,000 Hz

Wow & flutter

: Unmeasurable

Output

: Headphones (3.5 mm dia. stereo 

× 

1)

9 mW/ch at 10 % THD/16 ohms matching impedance (16 ohms to 1 kohm)
Out (3.5 mm dia. stereo 

× 

1) 0.6 V/50 kohms

OPT Out (3.5 mm dia. stereo 

× 

1) 0.6 V/50 kohms

Duration of battery

: Approx. 6 hours

(with T.S.P. ON)

when using two rechargeable batteries
(BN-R122 or equivalent) charged for 1.5 hours,
Approx. 21 hours when using two alkaline batteries
(LR6-Panasonic)
Approx. 48 hours when using two alkaline batteries and two alkaline
batteries in the external battery case

Power requirements

: DC 3 V (“R6” size battery 

× 

2)

DC 2.4 V (rechargeable battery 

× 

2)

DC IN 4.5 V

Dimensions (W

×

H

×

D) : 128.0

×

27.9 

×

136.1 mm (5-1/16”

×

1-1/8”

×

5-3/8”)

(Excluding buttons and controls)

Mass

: Approx. 235 g (0.52 lbs)

(without batteries)

AC adaptor

Input power source

: AC 230 V, 50 Hz

Output voltage

: DC 4.5 V, 0.8 A

*

 Design and specifications are subject to change without notice.

Specifications

Troubleshooting Guide

Before requesting service for this unit, check the chart below for a possible cause of the problem
you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the
problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not
solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit) to
locate a convenient service center, or consult your dealer for instructions.

Carrying dry cell batteries /
rechargeable batteries around

When putting dry cell or rechargeable batteries in a pocket or
bag, ensure that no other metal objects such as a necklace are
placed together with them. Contact with metal may cause short-
circuiting which, in turn, may cause a fire.
Be absolutely sure to carry the rechargeable batteries in the bat-
tery carrying case.

When purchasing rechargeable
batteries

As a safety precaution, the portable CD players made by JVC
have a construction designed to make it impossible to recharge
ordinary batteries.
To use rechargeable batteries, be absolutely sure to purchase the
rechargeable Ni-Cd batteries designed  especially for this unit.

Special rechargeable Ni-Cd batteries:
BN-R122 (set of 2)

For details, check with your dealer.

Cautions

Rechargeable batteries

• Only the BN-R122 battery can be recharged.
• If the power delivered by the batteries lasts for a very short

time after recharging, it means that the batteries’ service life is
over. Do not use them any more.

• Recharging already charged batteries will shorten their service

life.

• When recharging batteries for the first time or when they have

not been used for a long period of time, the play time may be
shorter than usual. In a case like this, repeatedly recharge and
discharge the batteries. This will restore them to their regular
state.

• Do not allow any metal objects to touch the terminals of re-

chargeable batteries since this may cause short-circuiting
which is dangerous.

• Do not peel off the plastic covering on the rechargeable batter-

ies. Short-circuiting may occur which is dangerous.

Dry cell batteries / rechargeable
batteries

To prevent damage to the batteries and electrolyte leakage, heed
the following points.
• Align the 

,

 and 

.

 polarities properly when inserting the bat-

teries.

• Do not mix different types or makes of batteries or old and

new batteries.

• Remove the batteries if you do not plan to use the unit for a

long period of time.

• Do not throw batteries into a fire, and do not short-circuit, dis-

assemble or subject them to excessive heat.

• Do not attempt to recharge dry cell batteries.

Special rechargeable
batteries

Ordinary dry cell
batteries/rechargeable
batteries

When driving a car

In the interest of traffic safety, do not operate the unit while driv-
ing.

AC adaptor

• Handle the AC adaptor carefully. Improper handling is dan-

gerous.

• Do not touch it with wet hands.
• Do not place heavy objects on top of it.
• Do not forcibly bend it.

• Be sure to connect only the AC adaptor provided with the unit.
• Disconnect the AC adaptor from the power outlet if the unit is

not going to be used for a long time.

Unit

No altering or remodeling

This can cause malfunctioning.

No dropping or strong impacts

This may damage the unit.

Locations to be avoided

Avoid using the unit in the following locations since they can
cause malfunctioning.
1.␣  Bathrooms and other moisture-prone places.
2.␣ Warehouses and other dusty places
3.␣  Very hot places near heating appliances, etc.

Do not leave the unit exposed to direct sunlight for
long periods of time

This may deform or discolor the cabinet and may also cause mal-
functioning.

Precautions for Listening with the
Headphones

• Do not play your headphones at a high volume. Hearing ex-

perts advise against continuous extended play.

• If you experience a ringing in your ears, reduce volume or dis-

continue use.

• Do not use while operating a motorized vehicle. It may create

traffic hazard and is illegal in many areas.

• You should use extreme caution or temporarily discontinue

use in potentially hazardous situations.

• Even if your headphones is an open-air type designed to let

you hear outside sounds, don’t turn up the volume so high that
you can’t hear what’s around you.

Notice about the rechargeable battery
The battery is designated recyclable.
Please follow your local recycling regulations.

Marking sign is located on bottom of the unit.

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIA-
TION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK, DO NOT EXPOSE THIS AP-
PLIANCE TO RAIN OR MOISTURE.

DANGER

INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
AVOID DIRECT EXPOSURE TO BEAM.

ADVARSEL

USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE
ER UDE AF FUNKTION.   UNDGÅ UDSÆTTELSE FOR STRÅLING.

VARO!

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA
NÄKYMÄTÖNTÄ LASERSÄTEILYLLE.     ÄLÄ KATSO SÄTEESEEN.

VARNING

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH
SPÄRREN ÄR URKOPPLAD.     BETRAKTA EJ STRÅLEN.

ADVARSEL

USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS
BRYTES.     UNNGÅ EKSPONERING FOR STRÅLEN.

VORSICHT

UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
UND SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM STRAHL AUSSETZEN.

(Påsat under apparatet)

(Tuotteen pohjassa)

(Apparatens undersida)

(Produktets underside)

(Unterseite des Gerätes)

(Bottom of product)

Bottom of the unit

Fast forward/

reverse

To adjust the

volume

To start play

To stop play

To turn off the

unit

HOLD

Using the unit with a car audio
system

XL-PV700 comes with the car adaptor and car audio cassette
adaptor.
• Car adaptor (CA-R455)
• Car audio cassette adaptor (CA-RC4/CA-RC5)

For connection to the car audio system:

If there is an Aux jack in the car audio system, connect the OUT
or OPT OUT jack of the CD player with the Aux jack using a 3.5
mm diameter stereo mini-plug signal cord (optional).
Depending on the automobile used, noise may occur, and in that case,
it is recommended that a KS-U32 noise filter (optional) be used.

It may not be possible to use the unit with some types of car ste-
reo owing to restrictions imposed by the construction of the car
audio cassette adaptor.

For further details, refer to the instructions of the part concerned.

Maintaining the unit

Wipe the unit with a soft cloth. Remove stubborn dirt using a
cloth which has been dipped in water or soapy water and wrung
out, and then wipe dry.
• If you intend to use a chemically treated cleaning cloth, read

its directions first.

• Do not use alcohol or paint thinners.

Maintaining the lens

Open the lid and clean the lens as shown in the figure.
Use a cotton swab to gently wipe off any finger-prints.
Recommended product:␣  Lens cleaner kit

Using the unit with an audio system

Using a stereo connection cable (not included), you can listen to
CDs through your audio system.

• Connect the cable to the amplifier after turning off its power.
• Do not connect the cable to the PHONO jacks on the amplifier.
• Obtain the optional connecting cable if the amplifier comes

with mini-phone jacks.

• Adjust the volume level on the amplifier.

 

VOLUME

4

2

OUT

T.S.P. OFF ONLY-OPT OUT

L

CD/AUX

R

OUT jack

Side panel of the unit

Amplifier

(White)

(Red)

Sound quality changes when HBS or LIVE is selected, but vol-
ume is reduced by approximately fifty percent.

The remote control can be operated regardless of the hold mode
of the unit.

Preparation:

Release the remote control from the hold mode.

 Operation confirmation tones

When an operation button is pressed, a confirmation tone
sounds. Refer to the parentheses in the illustration for the differ-
ent types of confirmation tones.

How to use the wired remote control

Reverse

(Beep Beep Beep)

Forward

(Beep Beep)

Skip function

Press once during play.

Search function

Keep depressed during play.

When adjusting the volume using the
remote control, position the volume
control on the unit between 4 and 6.

Press once during off or stop mode.

Press once during play.

Keep depressed during play or stop
mode.

(Beep

...

Bee

...

p)

(Beep)

(Beep

...

Beep)

Using the Unit with Optional Accessories

Maintenance

Using the Wired Remote Control  

Air blower for
camera lens

Lens

Lens

Stereo connection cable (not included)

 Note:

Accidental Operation Prevention Function (Hold Mode)

This function causes the unit to ignore short, accidental button
presses.

The misoperation prevention function pre-
vents the following:

• Powering on the unit accidentally (which can cause the batter-

ies to go dead).

• Play being cut off unexpectedly in the middle of a selection.

The unit and wired remote control have HOLD switches, each of
which works independently.

To use the accidental operation prevention
function

• To prevent the unit from powering up accidentally, set the

HOLD switch to the HOLD position.

• To prevent the unit from unexpected operation during play,

set the HOLD switch to the HOLD position after playing the
disc.

” indication

When the unit is in hold mode, pressing any operation button
causes the indication “

” to appear on the display.

When the unit is powered off

The “

” indication appears only when the 

3 8

 button is

pressed.

To release the function

Move back the HOLD switch.

Hold Mode

HOLD

HOLD

 Note:

OPT OUT jack

(T.S.P. OFF ONLY-OPT OUT)

You can listen to CDs only
when T.S.P. is set to off.

Hold Mode

Connect the car audio cassette adaptor to the unit’s
headphones jack. (When doing this, keep the unit’s
VOLUME control at a setting between 4 and 6.)

 Note:

 Note:

 Mentuke_XL-PG7 (B)

3/12/99, 6:49 PM

1

All manuals and user guides at all-guides.com

all-guides.com

Reviews: