JVC DLA-NX5 Instructions Manual Download

Page: 1 / 22

D-ILA Projector

“JVC Projector Calibration Software 12”

INSTRUCTIONS

About the marks being used in this manual

refers to as explanations/instructions for DLA-NX9/NX7 series.

refers to as explanations/instructions for DLA-NX5 series.

Items without markings are for all models.

“JVC Projector Calibration Software” is a tool that enables you to use the projector in an optimal condition at all times

with the use of a commercially available optical sensor.

Calibration Feature

By performing a precise calibration with easy procedures in optimizing the projected images, which changes

depending on the installation conditions, such as installation position of the main unit, lens shift/zooming position,

you can enjoy high-quality images that are suitable for the installation conditions. You can also maintain the projector

in an optional state by correcting distortions, such as those in the color balance, which are caused by the prolonged

use of the projector.

Environment Settings

Adjusts the video settings according to the installation environment to minimize any influence on the image quality

by objects, such as white walls or indirect illumination.

Import/Export Image Quality Adjustment Data

Enables you to save the image setting data to a PC from the projector, or imported from a PC to the projector via the

LAN terminal.

Gamma Data Adjustment Feature

Allows you to adjust the gamma curve of the projector according to your preference.

* “JVC Projector Calibration Software” is designed to adjust gamma and color display by changing the settings of the

projector.

* Please note that setting of the projector is changed by using this software.

●

Projectors that support calibration

Models supported:

DLA-NX9/NX7 series: DLA-NX9, DLA-NX7, DLA-N11, DLA-N8, DLA-N7, DLA-RS3000, DLA-RS2000

DLA-NX5 series: DLA-NX5, DLA-N6, DLA-N5, DLA-RS1000

●

PC (computer)

●

LAN cable

●

Optical sensor

Models supported: SpyderX Elite/Pro by Datacolor

i1 Pro2 by X-Rite

* SpyderX Elite/Pro sensor is required when using the Environment Settings feature.

About “JVC Projector Calibration Software”

Required Equipment

NX9/NX7
NX5

B5A-3404-11

Summary of Contents for DLA-NX5























Search results

Summary of Contents for DLA-NX5

Reviews:

Related manuals for DLA-NX5

Brands by name

Popular brands

JVC DLA-NX5, Instructions Manual

Search results

Summary of Contents for DLA-NX5

Reviews:

Related manuals for DLA-NX5

Brands by name

Popular brands