background image

5

1

6

XL-PR2B / LVT1180-004B / B

XL-PR2B / LVT1180-004B / B

XL-PR2B / LVT1180-004B / B

p6

p1

p5

Stereo headphones .......................................................................................................................... 1 pc.

Supplied Accessories

Concerning Compact Discs

PORTABLE CD PLAYER

XL-PR2B

INSTRUCTIONS

Thank you for purchasing this JVC product. Please read these instructions carefully before starting
operation to be sure to obtain optimum performance and a longer service life from the unit.

Only compact discs bearing this mark can be used with this unit.

However, continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage
the unit.

If moisture has formed on a disc

When moisture has formed because the
disc was brought suddenly into a warm
room from a cold environment, wipe off
the moisture using a soft dry cloth.

When storing discs

Avoid locations which are
• Exposed to direct sunlight.
• Susceptible to high levels of humidity or

dust.

• Directly exposed to heat from a heating

appliance.

• On top of a car dashboard or near the

rear window.

Handling precautions

• On the label side (the side with writing)

Do not write anything using a pencil,
ball-point pen, etc. Do not use adhesive
paper or labels.

• On the disc (shiny) side

Handle this side carefully to keep it free
from fingerprints or scratches. Do not
use record cleaners, solvents, etc.

• Do not attach labels or stickers to CDs.

Do not use CDs with exposed adhesive
from tape or left over peeled off stickers.

• Do not use scratch-proof protectors or

covers other than those specified for use
with this unit.

If the disk surface is dirty

Wipe it with a damp cloth and then wipe dry.
Wipe from the center toward the outer edge.

How to hold a disc

How to store the disc in
its case

How to remove a disc from its case

Label side up

LVT1180-004B [B]

CD-R and CD-RW discs recorded with the audio
CD format can be played back, though some may
not be played back because of the disc character-
istics or recording condition.

Play surface (shiny surface)

EN

0404SKMCREORI
©2004 VICTOR COMPANY OF JAPAN, LIMITED

Put the grip band on your hand

Adjust the grip band to your hand size.

Unit

Wipe the unit with a soft cloth. Remove stubborn dirt using a cloth which has been dipped in wa-
ter or soapy water and wrung out, and then wipe dry.
• If you intend to use a chemically treated cleaning cloth, read its directions first.
• Do not use alcohol or paint thinners.

Lens

Maintenance

Air blower for
camera lens

Lens

Precautions

Safety

1. Care of AC adaptor

 - The cord of the AC adaptor should be

routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Never take hold of the AC
adaptor if your hand is wet, and always grasp the plug when
connecting or disconnecting it.

2. Disconnect when not in use

 - When not in use, be sure to dis-

connect the AC adaptor from the AC power outlet.

3. Batteries

 - If the unit is not used for a long period of time or is

used only from an AC power source, remove all the batteries to
prevent potential damage due to battery leakage. Do not mix
(old and new ) batteries or different types of batteries.

Installation

■ 

Environment

1. Condensation

 - Moisture may form on the lens in the follow-

ing conditions…

• immediately after a heater has been turned on.
• in a steamy or very humid room.
• when the unit is suddenly moved from a cold environment to

a warm one. If moisture forms inside this unit, it may not op-
erate properly. To correct this problem wait about one hour
for the moisture to evaporate.

■ 

Placement

1. Foreign Material

 - Care should be taken so that objects do not

fall into and liquids are not spilled into the unit. Do not subject
this unit to excessive smoke, dust, mechanical vibration, or
shock.

2. Magnetism

 - The unit should be situated away from equipment

or devices that generate strong magnetic fields.

3. Stacking

 - Do not place any objects on top of the unit.

Maintenance

(See page 5 for details.)
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.

Service

1. Damage Requiring Service

 - The unit should be serviced by

qualified service personnel when:
(a) The AC adaptor is damaged; or
(b) Objects have fallen or liquid has been spilled into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits a

marked change in performance; or

(e) The unit has been dropped, or the enclosure damaged.

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Check this

• Extend the headphone cord (antenna) to improve reception.

• Is the AC adaptor securely connected?
• Is the HOLD switch set to OFF position?

Is the disc properly secured in place?

• Is the disc properly secured in place?
• Is there moisture condensation on the lens?

(Wait for about an hour and then try again.)

• Is the headphone plug inserted all the way?
• Is the plug dirty? (Wipe away dirt on the plug.)

Are you using the unit too near a TV or tuner? (If the TV or
tuner is connected to a simple indoor antenna, connect it to
an outdoor antenna.)

• Is the disc damaged?
• Is the disc playable on this player?
• Has the disc been inserted upside down?

Problem

Poor tuner reception

Does not turn on.

Cannot close the lid.

Cannot play discs.

Cannot hear music—too
noisy.

TV picture is distorted.
Other radio reception is
noisy.

“dISC” or “Er” is displayed
when a disc is in the
player.

Troubleshooting

If the remedies indicated in the chart do not solve the problem, refer to the directory of Autho-
rized Service Centers (enclosed with this unit) to locate a convenient service center, or consult
your dealer for instructions.

Portable CD player

Type

: Compact disc player

Signal detection system : Non-contact optical pickup (semiconductor laser)
Pickup system

: 3 beam laser

Number of channels:

: 2 channels (stereo)

Frequency response

: 20 Hz to 20 kHz

Wow & flutter

: Unmeasurable

Output

: Headphones (3.5 mm dia. stereo 

× 

1)

9 mW/ch at 10 % THD/16 

 matching impedance (16 

 to 1 k

)

FM tuning range

: 87.5 MHz - 108.0 MHz

Duration of battery

: Approx. 20 hours when using two alkaline batteries (LR6)

(with Anti-Shock
Protection EX OFF)
Power requirements

: DC 3 V (“R6” size battery 

× 

2)

DC 2.4V (rechargeable battery 

× 

2)

DC IN 4.5 V

Dimensions (W

×

H

×

D) : 145.5 mm 

×

32.1 mm 

×

145.5 mm

(Excluding buttons and controls)

Mass

: 300 g

(with grip band, without batteries)

AC adaptor (not supplied)

Input power source

: AC 230 V, 50 Hz

Output voltage

: DC 4.5 V, 600 mA

*

 Design and specifications are subject to change without notice.

Specifications

Cautions

Listening Precautions

• Do not play your headphones at a high volume. Hearing ex-

perts advise against continuous extended play.

• If you experience a ringing in your ears, reduce volume or dis-

continue use.

• Do not use while operating a motorized vehicle. It may create a

traffic hazard and is illegal in many areas.

• You should use extreme caution or temporarily discontinue use

in potentially hazardous situations.

• Even if your headphones is an open-air type designed to let you

hear outside sounds, don’t turn up the volume so high that you
can’t hear what’s around you.

Rechargeable batteries

• Rechargeable batteries (not supplied) can be used.
• To use the rechargeable batteries, follow the instruction manual

attached to the rechargeable batteries and charger (not sup-
plied).

Dry cell batteries

To prevent damage to the batteries and electrolyte leakage, heed
the following points.
• Align the 

,

 and 

.

 polarities properly when inserting the bat-

teries.

• Do not mix different types or makers of batteries or old and

new batteries.

• Remove the batteries if you do not plan to use the unit for a

long period of time.

• Do not throw batteries into a fire, and do not short-circuit, dis-

assemble or subject them to excessive heat.

• Do not attempt to recharge dry cell batteries.

Carrying dry cell batteries around

When putting dry cell batteries in a pocket or bag, ensure that no
other metal objects such as a necklace are placed together with
them. Contact with metal may cause short-circuiting which, in
turn, may cause a fire.

AC adaptor

• Handle the AC adaptor carefully. Improper handling is dan-

gerous.

• Do not touch it with wet hands.
• Do not place heavy objects on top of it.
• Do not forcibly bend it.

• Be sure to connect only the specified AC adaptor with the unit.
• Disconnect the AC adaptor from the power outlet if the unit is

not going to be used for a long time.

Unit

No altering or remodeling

This can cause malfunctioning.

No dropping or strong impacts

This may damage the unit.

Locations to be avoided

Avoid using the unit in the following locations since they can
cause malfunctioning.
1.  Bathrooms and other moisture-prone places.
2. Warehouses and other dusty places
3.  Very hot places near heating appliances, etc.

Do not leave the unit exposed to direct sunlight for
long periods of time

This may deform or discolor the cabinet and may also cause mal-
functioning.

When purchasing AC adaptor

Be absolutely sure to purchase the AC adaptor designed  especially
for this unit.

AC adaptor: AA-R4515

For details, check with your dealer.

VARNING

: Synlig Och 

osynlig laserstrålning när 

den öppnas och spärren är 

urkopplad. Betrakta ej 

strålen.

(s)

CAUTION

: Visible and invisible 

laser radiation when open and 

interlock failed or defeated.

AVOID DIRECT EXPOSURE TO 

BEAM.

(e)

ADVARSEL

: Synlig og usynlig 

laserstråling når maskinen er 

åben eller interlocken fejle.

Undgå direkte eksponering 

til stråling.

(d)

VARO

: Avattaessa ja 

Suojalukitus ohitettunatai 

viallisena olet alttiina näkyvälle 

ja näkymättömälle lasersäteilylle.

Vältä säteen kohdistumista 

suoraan itseesi.          (f)

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2.

CAUTION:

 Do not open the top cover. There are

no user serviceable parts inside the unit; leave all
servicing to qualified service personnel.

3.

CAUTION:

 Visible and invisible laser radiation

when open and interlock failed or defeated. Avoid
direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL,

PLACED OUTSIDE THE UNIT.

CAUTION:

• Do not block the ventilation opening or holes. (If the venti-

lation openings of holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted

candles, on the apparatus.

• When discarding batteries, environmental problems must

be considered and local rules or laws governing the dis-
posal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.

Reviews: