background image

FX-WRZSST-110 Wireless Sensing System Tool Installation Instructions

1

Applications

The FX-WRZSST-110 Wireless Sensing System Tool is 
a lightweight, portable, wireless receiver designed to 
receive wireless Radio Frequency (RF) data 
transmissions from Johnson Controls® FX-WRZ 
Series Wireless Room Sensors in One-to-One sensing 
system site survey applications. The FX-WRZSST-110 
Tool also serves as a signal test receiver or site survey 
tool prior to installing an FX-ZFR Series Wireless Field 
Bus System.

Prior to installation, use the FX-WRZSST-110 Tool, to 
verify the optimum locations for FX-WRZ Series 
Sensors and the FX-WRZ7850 Receiver in 
One-to-One wireless room sensing systems. You can 
also use the FX-WRZSST-110 Tool to verify the 
optimum locations for Johnson Controls FX-ZFR1810 
Coordinators, FX-ZFR1811 Routers, and 
FX-WRZ Series Sensors in wireless field bus 
applications.

North American Emissions Compliance

United States 

This equipment has been tested and found to 
comply with the limits for a Class A digital device 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection 
against harmful interference when this equipment is 
operated in a commercial environment. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications. 
Operation of this equipment in a residential area is 
likely to cause harmful interference, in which case 
the user will be required to correct the interference 
at his/her own expense.

RF Transmitters: Compliance Statement 
(Part 15.19)

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:

1.

This device may not cause harmful interference,
and

2.

This device must accept any interference
received, including interference that may cause
undesired operation.

Warning (Part 15.21)

Changes or modifications not expressly approved by 
the party responsible for compliance could void the 
user’s authority to operate the equipment.

FX-WRZSST-110 Wireless Sensing System Tool

Installation Instructions

FX-WRZSST-110

Part No. 24-10563-20, Rev. —

Issued April 12, 2011

Summary of Contents for FX-WRZSST-110

Page 1: ...r a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communi...

Page 2: ...e de la Classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada RF Transmitters Industry Canada Statements The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met This device has been designed to operate with an antenna having a maximum gain of 2 dB Antenna having a higher gain is strictly p...

Page 3: ...rength LED blinks over the course of 10 seconds If the RF signal strength is weaker than Good move the location of either device until an Excellent or Good RF signal strength is indicated Move on to the next location and repeat Step 1 through Step 9 as necessary 9 When testing is finished turn off the battery switch on the FX WRZSST 110 Tool and turn off the power switch on the test FX WRZ Series ...

Page 4: ...ntrols representative Two AA alkaline batteries are supplied with the FX WRZSST 110 Wireless Sensing System Tool Replace the batteries with high quality AA alkaline batteries as necessary ensuring that the batteries are installed in the proper polarity Both batteries should be replaced at the same time Note Batteries removed from this device must be recycled or disposed of in accordance with local...

Reviews: