![background image](http://html.mh-extra.com/html/jmp/skan-25-0/skan-25-0_manual_2020470001.webp)
Skan 25.0
Battery charger
JM no. 609 03 30
EN
Battery charger
ES
Cargador de baterías
IT
Caricatore batteria
PL
Ładowarka do akumulatorów
DA
Batterioplader
CS
Nabíječka baterií
SK
Nabíjačka batérií
NL
Acculader
FR
Chargeur de batterie
Thank you for choosing a JMP Skan battery charger. The JMP Skan 25.0 battery charger is suitable for daily use for rapid charging
of a battery and as a power supply during diagnostic work and flashing.
Technical data:
12-24 V / 5-25 A, for batteries from 5 Ah to 800 Ah
Dimensions: 280 x 270 x 80 mm, weight: 2.14 kg, mains power cable: 1.90 m, connection cable: 2.10 m
Suitable for:
• Standard lead acid
• Gel
• AGM
• EFB
• Lithium
Safety information:
• Read the instructions for use through carefully before using the charger.
• The charger is intended for charging lead acid, gel, AGM, EFB and lithium (LiFePO4) batteries. It must not be used for any other
purposes. Disposable batteries must not be charged. Do not charge any frozen batteries.
• Battery acid is corrosive. In case of accidental contact between the acid and the skin or eyes, rinse immediately under running
water and consult a doctor.
• When connecting and disconnecting the battery, wear safety glasses and keep the battery away from your face at all times.
• Keep out of reach of children. This device is not a toy and must not be used as such.
• This device should not be operated by people (including children) with limited physical, sensory or mental capabilities, nor by
people without sufficient relevant knowledge and experience if such people are not being supervised and have not received
comprehensive instruction.
• Potentially explosive gases may develop during the charging procedure. As such, sparks and naked flames must be avoided.
No smoking.
• Perform the charging procedure in a well ventilated and dry environment.
• Never place the battery charger on top of the battery during the charging procedure.
• Repairs and maintenance work on the device and mains power cable may only be performed by skilled professionals.
• Improper use of and interference with the device will void all warranty claims.
Scope of supply: :
JMP Skan 25.0 with adapter cable and terminals