background image

 

Electric Iron

 

I

NSTRUCTION 

M

ANUAL

 

 

SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 

IMPORTANT SAFEGUARDS 

 

When using electrical appliances, especially when children are present, basic 
safety precautions should always be followed including the following: 

 

READ ALL INSTRUCTIONS BEFORE USING. 

 

Use iron only for its intended use.

 

 

To protect against electric shock, do not immerse the iron in water or other 
liquids. 

 

The iron should always be turned off before plugging into or unplugging from an 
outlet.  Never yank cord to disconnect from outlet; instead grasp plug and pull to 
disconnect. 

 

Do not allow cord to touch hot surfaces.  Let iron cool completely before putting 
away.  Loop cord loosely around cord wrap when storing. 

 

Always disconnect iron from electrical outlet when filling with or emptying of 
water, and when not in use. 

 

Never operate this appliance if it has a damaged cord or plug, if it is not working 
properly, if it has been dropped or damaged in any manner or dropped into 
water.  To avoid the risk of electric shock, do not disassemble the iron or replace 
supply cord.  For service information see warranty page. 

 

Close supervision is necessary for any appliance being used by or near 
children. 

 

Do not leave iron unattended while connected or on an ironing board.  Always 
position iron carefully to prevent it from falling if ironing board is accidentally 
moved or cord is pulled.  Always use heel rest. 

 

Burns can occur from touching hot metal parts, hot water, or steam.  Use 
caution when you turn a steam iron upside down or use the surge of steam – 
there may be hot water in the water tank.  Avoid rapid movement of iron to 
minimize hot water spillage.   

 

Summary of Contents for J513W

















Reviews: