WP
- 40
&
WP
- 25 Wave Maker
These wave makers are intended to simulate the natural waves and
whirlpools found in a marine environment.
Before installing and using the pump, please read through these
instructions to familiarise yourself with the correct operation of the device.
Features:
•
Maximum flow rate of up to 13,000 litres/hour WP-40 (8,000
litres/hour WP-25).
•
Unique multi mode controller to allow adjustment of the
wavemaker to suit the users requirements.
•
Use of low-voltage, low power, DC variable-speed pump,
minimizing heat transfer to the aquarium and maximising user
safety.
•
Easy to use controller
•
Adjustable pump housing so pump flow direction can be easily
altered
•
Wide voltage input (AC100 ~ 240V 50/60Hz)
•
Can be used in a variety of aquarium sizes. Suitable for aquariums
with glass up to 15mm thickness.
Package Contents:
•
Wave maker pump
•
Intelligent controller
•
AC/DC adapter
•
Mains power cord
•
Light sensor (very small) and double sided tape for mounting
controller.
IMPORTANT INFORMATION:
•
In order to ensure product performance, please only operate the
pump in water.
•
The controller is NOT waterproof – please position the controller to
avoid water splashes.
•
Please take care whilst fitting the magnets to the glass.
•
If the Controller or AC/DC adapter are opened, the warranty will be
voided.
•
The Wave maker is suitable for indoor use in water only. The motor
in the wave maker will be damaged if it is run dry.
