COD. 1247030-GB / 1.3
FREE 15 R / FREE 30 R
1
Hands free activator.
TECHNICAL CHARACTERISTICS
FREE 15 R
FREE 30 R
Operating frequency
125kHz
Electricity
12/24V(ac)/(dc) +/- 10%
Consumption 50mA
Radiated power
<25mW
Wiring 4
wires
Op. temperature
-20ºC - +55ºC
Airtightness IP66
Size
87 x 78 x 15,5 mm 205 x 183 x 14 mm
Enabling area (hands-free mode)
1.5m
3m
INSTALLATION (figure A)
The activator is formed by two parts: a compact box (1) with a plastic front part and the wiring outlet at the back and an
adhesive trim (2). It is designed to be fitted directly to or built into the wall. It is secured by two screws (3), separated by
60mm (ideal separation if it is built-into a standard plug or socket box). The adhesive is fitted over Position 2 in the Figure,
ensuring that the led (5) is visible through the adhesive window. Before fitting the adhesive, screw in and configure the
activator.
N.B.: The activator should not be installed on metal surfaces, as this may reduce the enabling area.
