1
LA5155 Wireless Remote Control Keyfob
User Guide
Specifications
LED
Transmission indication
Power Supply
3V DC (1x CR2032 Lithium Coin size Battery)
Battery Life
Approximate Up to 12 months
Coverage Range
Up to 50 meters (line of sight)
Dimension
61mm x 37mm x 13.5mm
Remote Control Function Keys
DISARM
Press once to disarm the system
FULL ARM
Press once to arm the system
PARTIAL ARM
Press to partial arm the system with partial arm (For selected system only)
FULL ARM + PARTIAL ARM
Press both buttons at the same time to activate the panic
alarm
Remove Tag when Programming
If the wireless remote control keyfob comes with a
system kit, it has been pre-programmed into the
Control Unit and is not necessary to program it.
You could remove the battery protection tag –
Replace or Reinstall Battery
i.
Remove back cover screw and back cover.
ii. Replace or reinstall the CR2032 Lithium coin size Battery from its holder in
the correct polarity as shown.
iii. Replace back cover and tighten the screw.
\
Programming Remote Control Keyfob into your wireless system
Programming Keyfob into Home Automation Controller system, can select input device type Remote Key
or Other, if the Keyfob set other input device type, it will only use for Matrix Action Input condition.
e.g. Setup the detector parameter: input device 3, Remote Key
•
It is accessed directly from Day mode via press [SET] key
•
Press [SET] key will go into Program Mode
LA5592 Home Automation Controller
POWER
[SET]
[ACTION]
[RESET]
08:00 01- Jan
ACT INFO
SETUP
08:00 01- Jan
DAY
