180
109
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P170
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P170)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
http://canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. Fully charge the Trance Max for up to 10 hours of party time.
When they’re not rocking out, the LED
lights on your speaker let you know
what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you can
use the included adapter or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between your device and
the speaker’s
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the speaker has
Bluetooth
.
2. Turn on the speaker (press and hold the power button for 3 seconds) and look for the front
screen to illuminate with a multicolored light show.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Trance Max in your device’s
Bluetooth
list or click YES.
USA
[email protected]
1.888.802.0040
8:30am–7:00pm EST M–F
[email protected]
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and
Bluetooth
will find each other every time, as long as the speaker is
set to
Bluetooth
and your device’s
Bluetooth
is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that end.
You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and hold the
+ and – buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Trance Max but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more, the JAM
Trance Max will automatically shut off to preserve battery power.
Thank you for purchasing
the
JAM Trance Max
.
Check out the sections
below for all the
important information
about your new speaker.
Powering
On
Pairing
Mode
Connected
Low
Battery
Continued on page 2.
or
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. This is the power button
2. This is the microphone
3. Turn the music down
4. Turn the music up
5. Skip back a track
6. Push it to play, push it again to pause
7. Jam on to the next song
8. Control the brightness of your light show
9. Choose between 7 different light colors
10. Shuffle through 6 different light shows
11. The power cord goes here
12. Here’s where you hook it up old-school
13. Toggle between languages here
14. Language selector pin
Bluetooth
®
Devices
JAM Trance Max
on
>
3s
14
11
13
12
3
5
2
1
4
6
7
8
9
10
