Troubleshooting Steps for Jabra Elite 3
How do I pair my Jabra Elite 3 with my mobile device?
To pair your headset with your mobile device or tablet, follow these steps.
1.
Turn on the Bluetooth setting on your mobile device.
2.
Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press the Left and Right buttons.
The LEDs on both earbuds will turn green.
3.
To enter pairing mode, simultaneously press and hold (3 seconds)
the Left and Right buttons on the earbuds, until the LEDs on the earbuds
flash blue.
The earbuds are now ready to pair with your mobile device.
Note
If you want to use just one earbud, you must still pair both earbuds with
your mobile device. After the pairing, you can place one of the earbuds in
the charging case.
4.
To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Elite earbuds from the list. If the Jabra device is listed more than once,
select the entry showing the headphone icon. Enter “0000” (four zeros) if
you are asked for a PIN.
In daily use, when you turn on the earbuds, they will automatically reconnect with the
last previously paired device, if it is turned on and within range.
How do I access the voice assistant using my Jabra device?
To access the voice assistant on your mobile device using your Jabra device, double-
press the Left button when not on a call.
