background image

www.jaboboat.com Email: [email protected]

Phone:189 2833 0369

1

JABO-2AG/3CG Auto Bait Boat/Fish Finder

Version

2020080

Please read the instructions carefully before using this product

JABO3CG is the 3rd generation product of JABO series of intelligent bait boats. The

product adopts GPS positioning and electronic compass navigation. It can store

32

target bait positions, and can automatically (manually) set the starting position.It is a

bait/fish finding robot that can auto move from starts point,auto navigate to nesting

positions,auto release bait(hooks,etc),then accurately return to start point.Meanwhile a

highly sensitive fish finder and a lure light are already installed at bottom which can

detect water depth,terrain,temperature,fish size and attract fish at night.

1. It has the characteristics of precise positioning and precise navigation. For

positioning, the navigation error radius is 0-1 meters.

2. Directional and fixed-distance automatic navigation, and the navigation distance

which ranges from 20 meters to 500 meters (adjustment interval of 20 meters) can be

preset on the remote control to realize automatic navigation at a distance of 300M.

Summary of Contents for Jabo-2AG/3CG
















Reviews: