background image

1.

 

OVERVIEW

Z-395 EHT

 electronic lock is a contactless reader combined with a standalone controller and 

electromechanical lock. The lock is powered by four AA type batteries. Compact, with five 
operational modes, easy in installation, programming and servicing, this lock is a perfect access 
control solution for various storage places: gym lockers, changing cabins, office furniture, trade 
equipment. Particularly broad application of these locks happens in places like SPA, water 
parks, gyms, swimming pools.

Z-395

 

EHT

 lock can be installed as a standalone device, or as a part of a complex access 

control solution. For access keys, it accepts contactless key fobs and bracelets. Z-395 EHT can 
operate in five different modes:
  - 

Gym Mode

keys are not tied to locks. Any key can open and close any free locker.

  - 

Logic Mode

:

 keys are not tied to locks. Any key can open and close any free locker. The 

number of used locker and battery levels are stored into keys. This is convenient when the user

 

forgets which locker he used. Can set the maximum for the number of lockers per one user 
(range 1 to 15). Computerized logging and lock setup. Only works with Lock Manager

 

software.

  - 

General Mode

:

 a typical lock controller operation: only the key(s) stored in the lock's 

memory (maximum 24) can open that lock.
  - 

Safe Deposit Box Mode

:

 the lock emulates safe deposit box operation. To open the lock, all 

the keys in controller database (max. 26) must be 

swipe

 to it, one after another.

  - 

Custom Mode

:

 you can design your own custom operational logic, subject to your needs. 

Then obtain updated firmware from the Manufacturer and download it into the lock with 

           

an

 

RF-1996

 adapter.

Programming of operational modes, Master and User cards, is done via Reset button on the 
lock's case (see Chapters 4 to 11) or via 

Lock Manager

 software using an 

RF-1996

 adapter 

(see Chapter 12). Selected modes and cards database are stored in the lock's NVRAM (non-
volatile memory).
After one of the modes selected and all configuration done, the lock starts to work according to 
these rules:
On key 

swipe

 to the lock's reader, 

  -

 

if the token has access granted, a beep sounds and the LED flashes

 

green, or else

  -

 

if the token has access denied, a beep sounds and the LED flashes

 

red.

Z-

395

 EHT

www.ironlogic.

me

Z-395 EHT 

RFID 

Electronic Furniture Lock

with EM-Marine & HID ProxCard II &

 

Atmel

 

(T5557) reader

 

(

125 

kHz) 

and standalone controller

User Manual

page 1

Summary of Contents for Z-395 EHT















Reviews: