1
CT230 Quick Guide
This Guide is intended for quick consultation only and does not replace the Use and Maintenance Manual.
Before using the machine, read the Use and Maintenance Manual contained in the machine packaging thoroughly and
rigorously respect all the instructions.
PREPARATION/OPERATION
Fill the detergent tank.
Fill the Chem Dose tank (OPTIONAL).
Raise the side flaps and insert the brushes
under the head, making sure they rest against
the aligners.
Turn the ignition key to switch the machine on.
To attach the brushes automatically, proceed
as follows:
Press the “Click-Off-On” button. The machine
first performs a release operation, then imme
-
diately afterwards enables the attachment ope-
ration. Press the “Click-Off-On” button again to
automatically attach the brushes.
Select the most suitable cleaning programme
according to the surface and dirt to be remo-
ved:
P1: light cleaning programme
P2: medium cleaning programme
P3: heavy cleaning programme.
After the cleaning programme has been
selected, the machine chooses the advance
speed and quantity of detergent, then turns the
suction and brush motors on.
Press the Chem Dose system button (OPTIO-
NAL).
The machine can be operated without using the
3 cleaning programmes provided by the ma-
nufacturer. In this case, the brush and suction
motors must be turned on and the quantity of
detergent regulated manually by pressing the
buttons shown.
Adjust the pump to the required flow 0.5-3%,
the regulator is under the bung shown.
Operate the machine movement pedal.
If necessary, release the service or parking
brake.
Begin working.
When you have finished cleaning, proceed as
follows:
•
Turn the brush/suction motor off.
•
Turn the ignition key.
•
If necessary, charge the batteries.
Choose the direction of movement by moving
the direction selector. Select maximum speed
by turning the potentiometer.
PLDC01956
