Single-Axis MEMS Gyro Evaluation Board
ISZ-1215EVB
InvenSense, Inc., 1197 Borregas, Ave. Sunnyvale, CA 94089, USA
1
EB-ISZ-1215-00-02
Tel: +1 (408) 988-7339 Fax: +1 (408) 988-8104
©2009 InvenSense, Inc. All rights reserved.
Website: http//www.invensense.com
GENERAL DESCRIPTION
The ISZ-1215EVB provides a simple means of evaluating the ISZ-
1215 Z-axis angular rate gyroscope. The gyro contains all
required conditioning electronics in a single chip measuring 4 x 5
x 1.2mm. The ISZ-1215 incorporates a Z-axis low-pass filter and
an EEPROM for on-chip factory calibration of the sensor. Factory
trimmed gyro scale factor eliminates the need for external active
components and end-user calibration. A built-in Proportional-To-
Absolute-Temperature (PTAT) sensor provides temperature
compensation information. The product is lead-free and Green
Compliant.
APPLICATIONS
GPS
Navigation
Devices
Robotics
Electronic
Toys
Platform
Stabilization
PIN DEFINITIONS
FEATURES
Fully-tested board for easy evaluation of single-axis
(Z) gyro
Fully integrated Z-axis gyros on a single chip
67°/s full scale range
15mV/°/s
sensitivity
Integrated amplifiers and low-pass filter
Auto Zero function for bias calibration
On-chip temperature sensor
High vibration rejection over a wide frequency range
High cross-axis isolation by proprietary MEMS design
3V single supply operation
Hermetically sealed for temp and humidity resistance
10,000
g
shock tolerant
RoHS and Green Compliant
ELECTRICAL SPECIFICATIONS
Pin
Signal
Purpose
1 NC
No
Connection
2
HPS
Auto Zero Input
3
OUTZ
Output of the Z-Axis Gyro
4
PTAT
Temperature Sensor Output
5
VREF
Voltage Reference Output
6 GND
Ground
7 GND
Ground
8 +VOUT
VDD
for
Gyro
9 GND
Ground
10
+VIN
Input Supply Pin for LDO
Parameter
Specifications
Unit
Full-Scale Range
±67 °/sec
Sensitivity
15 mV/°/sec
Cross Axis Sensitivity
± 1
%
Non-linearity
< 1
% of FSR
Gyro Supply Voltage
3.0 ±0.3
V
Gyro Supply Current
4.5 mA
Operating Temperature
-20 to +85
°C
On time
50 ms
Shock Tolerance
10,000
g
Component Distributors, Inc.
1-800-777-7334
www.cdiweb.com
[email protected]
