PWT-7D MANUAL
TWO OUTLET ELECTRONIC WATER TIMER
For watering use with outdoor home water faucet only. Do not use indoor or with appliance. Use only with pressures of 60
PSI (4 BAR) max. Do not use with water exceeding 100°F (38°C). Do not use on outlet with “Y” connectors or other hose
accessories. Detach and drain before freezing weather season
.
INSTALLING THE BATTERIES
•
Remove the tray from the back of the timer by sliding it out
• Insert 2 AA (1.5V) alkaline batteries (not included) onto the battery tray, then
reinsert the tray to the back of the timer.
• Replace battery every year, when low battery is indicated on the screen or when
long unattended use
. –
PROGRAMMING THE TIMER–
• Rotate the dial to the positions indicated for setup
• Press L/R button to switch between the left and the right outlet for programming
• To maintain water pressure both Left and Right outlets will not operate concurrently, it will only work one side at a time.
Note: The dial should be in the RUN position for the timer to operate (Programed Mode or Manual Mode)
SET CLOCK
• Rotate the dial to SET CLOCK
• Press the + or – button to advance or reverse the clock time
(Hold the button to advance the timer quicker)
START TIME
• Rotate the dial to START TIME
• Press L/R to choose left or right valve
• Press the + or – button to set the start time (hold the button to advance the time quicker)
HOW LONG
• Rotate the dial to HOW LONG
• Press the + or – button to set the length of the watering time (1 MIN up to 360 MINS)
HOW OFTEN
• It allows you to set the program to repeat from 1HR, 2HRS, 4HRS, 12 HRS
and 1-7 days.
• Rotate the dial to HOW OFTEN
• Press the + or – button to set the frequency
