Inspur Yingxin NF5280M2 Manual Download

Page: 1 / 64

Dear User of Inspur Yingxin Server ,

Heartfelt thanks for your use of Inspur Yingxin Server.
This manual briefs you on the technical characteristics and the system

installation and setup of the server, and helps you understand and use this
server with great ease.

Please deliver the package of our product to waste recycling station for

further treatment, to avoid pollution and do our part in protecting the envi-
ronment.

This manual is property of Inspur Group Co., Ltd.
The User Manual is not to be copied by any group or individual in any

manner without the consent of Inspur Group Co., Ltd. Inspur Group Co.,
Ltd. reserves the right of revising this manual momentarily.

The contents of this manual are subject to changes without further no-

tice.

Feel free to contact Inspur Group Co., Ltd. if you have any question or

suggestion about this manual.

Inspur Group Co., Ltd.
June, 2011

Inspur is registered trademarks of Inspur Group Co., Ltd.
Other trademarks belong to their corresponding registered corporations.

Summary of Contents for Yingxin NF5280M2

































































Search results

Summary of Contents for Yingxin NF5280M2

Reviews:

Related manuals for Yingxin NF5280M2

Brands by name

Popular brands

Inspur Yingxin NF5280M2, Manual

Search results

Summary of Contents for Yingxin NF5280M2

Reviews:

Related manuals for Yingxin NF5280M2

Brands by name

Popular brands