PACKAGE CONTENTS
• 75" Tripod Projector Screen
•
Quick Setup Guide
FEATURES
• Durable, high-contrast material
• Easy to operate
Before using your new product, please read
these instructions to prevent any damage.
Quick Setup Guide
|
NS-SCR115
75" Tripod Projector Screen
# ITEM
1
Screen hanger notch
2
Flip-lever center column
lock
3 Screen
height
handle
4
Flip-lever for the screen
height handle lock
5
Positioning pin release
lever
6 Positioning
hole
7 Tripod
leg
8 Screen
enclosure
9 Projector
screen
hanging
bracket
10 Positioning
pin
11 Projector
screen
DESCRIPTION
Provides a notch to hang the projector screen.
Locks or unlocks the first section of the tripod center
column.
Hold this handle to raise or lower the center column.
Locks or unlocks to slide up or down the screen height
handle.
Push this release lever to insert or release the
positioning pin in the positioning hole.
Attaches to the positioning pin on the back of the
projector screen.
Supports the tripod and projector screen.
Enclosure for the screen when not in use.
Hang the projector screen using this bracket.
Position projector screen by inserting it into
positioning hole.
Displays pictures from the projector.
Flip-lever center
column lock
USING YOUR TRIPOD PROJECTOR SCREEN
1
Open the three legs of the tripod and stand the tripod up.
2
Loosen the flip-lever center column lock, then raise the center column so
that the screen hanger notch is just below your eye-level (this position
makes it easier to attach the projector screen hanging bracket), then fasten
the flip-lever center column lock to secure the column in place.
