Introduction
The Imation DataGuard rf™ Scan Station uses the latest RFID technology to track the
movement of cartridges in and out of a data center, off-site facility, or DR location. The
Scan Station reads RFID-enabled cartridges, either individually or within a transport case,
as they arrive and exit a location. The DataGuard rf™ Tape Tracking System automatically
logs each cartridge transaction into a tracking database that is linked to the customer’s tape
management system. This solution efficiently accounts for the location of all data cartridges
and provides both reporting and audit capabilities.
DataGuard rf Scan Station Contents*
1.
DataGuard rf Scan Station (Model #DGSCN-100)
2. DataGuard rf RFID Antenna Pad (Model #DGANT-100)
Safety Instructions—please read thoroughly before using the Scan Station!
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but
are not limited to, the following:
Keep a copy of the operating manual close to the Scan Station for easy reference for all operators.
Follow the Operator’s Manual carefully. Follow the correct procedure when setting up the device.
The Scan Station reader model DGSCN-100 and Antenna Pad model DGANT-100 are designed to work
together. Neither should be used with other unauthorized equipment.
1
3
.
RS-232 Cable
**
(Part #XX-XXXX-XXXX-X)
4
.
Power Cable
Preliminary Copy
**This RS-232 Cable must be used to minimize risk of harmful interference.
*Specifications are subject to change without notice.
