![background image](http://html.mh-extra.com/html/ikelite/dsc-h3/dsc-h3_instruction-manual_2042499001.webp)
Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 45 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200' (60m).
Ikelite Digital Housing
i n s t r u c t i o n
m a n u a l
#6111.3 for Sony DSC-H3
#6111.10 for Sony DSC-H10
2
3
4
PPlleeaassee RReeaadd
We suggest that you read this instruction booklet thoroughly
before use. If you are new to underwater photography be sure
to read the General and Photo Tips.
We also suggest that you read the camera manual thoroughly
to have a full understanding of where each camera control is
located and what function each control provides.
PPlleeaassee RReeaadd IIff U
Ussiinngg aann EEVV--CCoonnttrroolllleerr
The EV-Controller used with Ikelite DS Substrobes have two
user settings. One setting is for strobe selection, the other is for
pre-flash or non pre-flash. TThhiiss ccaam
meerraa uusseess pprree--ffllaasshh, thus the
EV-Controller should be set to the pre-flash position when used
with this camera.
IInniittiiaall CCaam
meerraa SSeettuupp
1. Use of “M” Manual exposure mode is recommended.
2. Set aperture to highest f-stop number (8.0-9.0).
3. Set ISO to “100”.
CCaam
meerraa nnootteess::
1. Camera does not stop down aperture (to a higher number) in
macro mode, however the aperture can be manually changed in
“M” manual mode.
2. In macro mode, the camera will focus closer when the zoom is
set to wide angle setting.
3. Built-in flash must be up all the way, or it will not fire.
O
Oppeenniinngg tthhee H
Hoouussiinngg
1. Lid Snaps have a LLoocckk. To open, push each Lid Snap Lock
forward and lift as shown. Keep pressure on the Lid Snap so
that it does not fly open
quickly.
Some lid snaps have a lot of
spring tension once they go
over center, so keep a firm
grip on the lid snap. Lid
snaps may be opened one at
a time or simultaneously.
Lift
Push Forward
Lid Snap Lock
Back View
[D] Menu
[E] Display
[F] Macro
[G] OK
[H] Flash
[I] Self-timer
[A] Playback
[B] Zoom Out
[C] Zoom In
Mode
Power
B
C
E
G H
F
A
D
I
J
[J] Home
H
Hoouussiinngg CCoonnttrroollss ((ccoonntt..))
Front View
Shutter
Release
Lid
Snap
Lens
Port
H
Hoouussiinngg CCoonnttrroollss