background image

Misprints, errors and technical changes reserved

kvm-tec 

First Aid

MASTERflex

Video error 

(stripes in the 

picture)

USB is not 

working

No Power

(No LED)

Check the  

powerplug

Is the power 

supply ok? Try 

another Unit.

Try reprogramming 

the Unit by using a 

JTAG programmer

Contact kvm-tec 

support

Are the USB 

Devices plugged 

in correctly?

Is the USB cable 

on the Local side 

plugged into the 

PC?

Are the USB  

Devices working 

directly on the 

PC?

Check if local 

and remote Unit 

have the same 

firmware

Replace the USB 
cable from PC to 

the Local  
Extender

Check if the local 

or the remote 

Unit is causing 

the problem by 

swaping first the 

local and than the 

remote Unit to 

another Unit

Contact kvm-tec 

support

Check if all  

cables are plug-

ged in correctly

Check if the PC is 

sending a Image by 

plugging in a  

monitor on the 
local out of the 

local Unit

Check if the DDC is 

set correctly (in menu 

under point „O“)

Check if both 

Units have the 

correct firmware

No Video

Contact kvm-tec 

support

Check if all  

cables are plug-

ged in correctly

Check if the PC is 

sending a Image 

by plugging in a 

monitor on the 
local out of the 

local Unit

Check if local and re-

mote Unit have the 

correct firmware

Check if the DDC 

is set correctly (in 

the menu under 

point „o“)

Check if the 

network switch 

is setup correctly 

and has enough 

bandwidth

Contact kvm-tec 

support

Check if other units 

have the same  

behaviour

We are here for you to answer

your questions about installation? 

Manual download www.kvm-tec.com

or 

kvm-tec Installationchannel on our homepage 

      personally  +43 2253 81912

kvm-tec Support

kvm-tec Support

[email protected]@kvm-tec.com

Phone: +43 2253 8

19

12 - 30

Phone: +43 2253 8

19

12 - 30

Check out  

our Installation 
Channel:

www.kvm-tec.com

flex

master

kvm-tec 

Quick  

Installation

6022 SET

 MASTERflex MV2 DUAL IN 

COPPER

KT - 6022L CPU/LOCAL

KT - 6022R CON/REMOTE

Summary of Contents for kvm-tec master flex 6022

Page 1: ...ut of the local Unit Check if the DDC is set correctly in menu under point O Check if both Units have the correct firmware No Video Contact kvm tec support Check if all cables are plug ged in correctly Check if the PC is sending a Image by plugging in a monitor on the local out of the local Unit Check if local and re mote Unit have the correct firmware Check if the DDC is set correctly in the menu...

Page 2: ... your kvm tec Extender is now in use for many years MTBF approx 10 years Network cable CAT5e 6 7 up to 150m 492ft Power plug 12V 1A redundant Network cable CAT5e 6 7 up to 150m 492ft main link Audio from PC Audio to PC Audio to speaker Audio from microphone DVI in 2 from PC DVI to Monitor 2 Power plug 12V 1A redundant Delivery Content Delivery Content LOCAL CPU Unit LOCAL CPU Unit 1 x MA2 local CP...

Page 3: ...s Overview Settings Features D DDC Option DDC Option Fix settings 1020 x 1080 L Local Settings Settings Local R Remote Settings Settings Remote A About Overview Overview Upgrades Upgrades Q Exit Exit SYSTEM STATUS Single Dual In the status overview menu the current status of the extender connection is displayed It provides information on the connection itself as well as resolution of the video cha...

Page 4: ...rt Alert System C Diagnosis Diagnosis menu U Unlock Features Unlock Features I IP Management IP Management Q Exit POINT TO POINT You can switch the Point to Point mode on and off by pressing the P key ATTENTION if the point to point mode is activated the switching mode cannot be activated MATRIX SWITCHING MODE By pressing the M button you can switch the Matrix Switching Mode off and on KVM TEC Gew...

Reviews: